39 lines
1.2 KiB
Text
39 lines
1.2 KiB
Text
|
Broadcom BCM2835 auxiliar SPI1/2 controller
|
||
|
|
|
||
|
|
The BCM2835 contains two forms of SPI master controller, one known simply as
|
||
|
|
SPI0, and the other known as the "Universal SPI Master"; part of the
|
||
|
|
auxiliary block. This binding applies to the SPI1/2 controller.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: Should be "brcm,bcm2835-aux-spi".
|
||
|
|
- reg: Should contain register location and length for the spi block
|
||
|
|
- interrupts: Should contain shared interrupt of the aux block
|
||
|
|
- clocks: The clock feeding the SPI controller - needs to
|
||
|
|
point to the auxiliar clock driver of the bcm2835,
|
||
|
|
as this clock will enable the output gate for the specific
|
||
|
|
clock.
|
||
|
|
- cs-gpios: the cs-gpios (native cs is NOT supported)
|
||
|
|
see also spi-bus.txt
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
spi1@7e215080 {
|
||
|
|
compatible = "brcm,bcm2835-aux-spi";
|
||
|
|
reg = <0x7e215080 0x40>;
|
||
|
|
interrupts = <1 29>;
|
||
|
|
clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI1>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi2@7e2150c0 {
|
||
|
|
compatible = "brcm,bcm2835-aux-spi";
|
||
|
|
reg = <0x7e2150c0 0x40>;
|
||
|
|
interrupts = <1 29>;
|
||
|
|
clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI2>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>;
|
||
|
|
};
|