/* * fs/direct-io.c * * Copyright (C) 2002, Linus Torvalds. * * O_DIRECT * * 04Jul2002 Andrew Morton * Initial version * 11Sep2002 janetinc@us.ibm.com * added readv/writev support. * 29Oct2002 Andrew Morton * rewrote bio_add_page() support. * 30Oct2002 pbadari@us.ibm.com * added support for non-aligned IO. * 06Nov2002 pbadari@us.ibm.com * added asynchronous IO support. * 21Jul2003 nathans@sgi.com * added IO completion notifier. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * How many user pages to map in one call to get_user_pages(). This determines * the size of a structure in the slab cache */ #define DIO_PAGES 64 /* * This code generally works in units of "dio_blocks". A dio_block is * somewhere between the hard sector size and the filesystem block size. it * is determined on a per-invocation basis. When talking to the filesystem * we need to convert dio_blocks to fs_blocks by scaling the dio_block quantity * down by dio->blkfactor. Similarly, fs-blocksize quantities are converted * to bio_block quantities by shifting left by blkfactor. * * If blkfactor is zero then the user's request was aligned to the filesystem's * blocksize. */ /* dio_state only used in the submission path */ struct dio_submit { struct bio *bio; /* bio under assembly */ unsigned blkbits; /* doesn't change */ unsigned blkfactor; /* When we're using an alignment which is finer than the filesystem's soft blocksize, this specifies how much finer. blkfactor=2 means 1/4-block alignment. Does not change */ unsigned start_zero_done; /* flag: sub-blocksize zeroing has been performed at the start of a write */ int pages_in_io; /* approximate total IO pages */ sector_t block_in_file; /* Current offset into the underlying file in dio_block units. */ unsigned blocks_available; /* At block_in_file. changes */ int reap_counter; /* rate limit reaping */ sector_t final_block_in_request;/* doesn't change */ int boundary; /* prev block is at a boundary */ get_block_t *get_block; /* block mapping function */ dio_submit_t *submit_io; /* IO submition function */ loff_t logical_offset_in_bio; /* current first logical block in bio */ sector_t final_block_in_bio; /* current final block in bio + 1 */ sector_t next_block_for_io; /* next block to be put under IO, in dio_blocks units */ /* * Deferred addition of a page to the dio. These variables are * private to dio_send_cur_page(), submit_page_section() and * dio_bio_add_page(). */ struct page *cur_page; /* The page */ unsigned cur_page_offset; /* Offset into it, in bytes */ unsigned cur_page_len; /* Nr of bytes at cur_page_offset */ sector_t cur_page_block; /* Where it starts */ loff_t cur_page_fs_offset; /* Offset in file */ struct iov_iter *iter; /* * Page queue. These variables belong to dio_refill_pages() and * dio_get_page(). */ unsigned head; /* next page to process */ unsigned tail; /* last valid page + 1 */ size_t from, to; }; /* dio_state communicated between submission path and end_io */ struct dio { int flags; /* doesn't change */ int op; int op_flags; blk_qc_t bio_cookie; struct block_device *bio_bdev; struct inode *inode; loff_t i_size; /* i_size when submitted */ dio_iodone_t *end_io; /* IO completion function */ void *private; /* copy from map_bh.b_private */ /* BIO completion state */ spinlock_t bio_lock; /* protects BIO fields below */ int page_errors; /* errno from get_user_pages() */ int is_async; /* is IO async ? */ bool defer_completion; /* defer AIO completion to workqueue? */ bool should_dirty; /* if pages should be dirtied */ int io_error; /* IO error in completion path */ unsigned long refcount; /* direct_io_worker() and bios */ struct bio *bio_list; /* singly linked via bi_private */ struct task_struct *waiter; /* waiting task (NULL if none) */ /* AIO related stuff */ struct kiocb *iocb; /* kiocb */ ssize_t result; /* IO result */ /* * pages[] (and any fields placed after it) are not zeroed out at * allocation time. Don't add new fields after pages[] unless you * wish that they not be zeroed. */ union { struct page *pages[DIO_PAGES]; /* page buffer */ struct work_struct complete_work;/* deferred AIO completion */ }; } ____cacheline_aligned_in_smp; static struct kmem_cache *dio_cache __read_mostly; /* * How many pages are in the queue? */ static inline unsigned dio_pages_present(struct dio_submit *sdio) { return sdio->tail - sdio->head; } /* * Go grab and pin some userspace pages. Typically we'll get 64 at a time. */ static inline int dio_refill_pages(struct dio *dio, struct dio_submit *sdio) { ssize_t ret; ret = iov_iter_get_pages(sdio->iter, dio->pages, LONG_MAX, DIO_PAGES, &sdio->from); if (ret < 0 && sdio->blocks_available && (dio->op == REQ_OP_WRITE)) { struct page *page = ZERO_PAGE(0); /* * A memory fault, but the filesystem has some outstanding * mapped blocks. We need to use those blocks up to avoid * leaking stale data in the file. */ if (dio->page_errors == 0) dio->page_errors = ret; get_page(page); dio->pages[0] = page; sdio->head = 0; sdio->tail = 1; sdio->from = 0; sdio->to = PAGE_SIZE; return 0; } if (ret >= 0) { iov_iter_advance(sdio->iter, ret); ret += sdio->from; sdio->head = 0; sdio->tail = (ret + PAGE_SIZE - 1) / PAGE_SIZE; sdio->to = ((ret - 1) & (PAGE_SIZE - 1)) + 1; return 0; } return ret; } /* * Get another userspace page. Returns an ERR_PTR on error. Pages are * buffered inside the dio so that we can call get_user_pages() against a * decent number of pages, less frequently. To provide nicer use of the * L1 cache. */ static inline struct page *dio_get_page(struct dio *dio, struct dio_submit *sdio) { if (dio_pages_present(sdio) == 0) { int ret; ret = dio_refill_pages(dio, sdio); if (ret) return ERR_PTR(ret); BUG_ON(dio_pages_present(sdio) == 0); } return dio->pages[sdio->head]; } /** * dio_complete() - called when all DIO BIO I/O has been completed * @offset: the byte offset in the file of the completed operation * * This drops i_dio_count, lets interested parties know that a DIO operation * has completed, and calculates the resulting return code for the operation. * * It lets the filesystem know if it registered an interest earlier via * get_block. Pass the private field of the map buffer_head so that * filesystems can use it to hold additional state between get_block calls and * dio_complete. */ static ssize_t dio_complete(struct dio *dio, ssize_t ret, bool is_async) { loff_t offset = dio->iocb->ki_pos; ssize_t transferred = 0; /* * AIO submission can race with bio completion to get here while * expecting to have the last io completed by bio completion. * In that case -EIOCBQUEUED is in fact not an error we want * to preserve through this call. */ if (ret == -EIOCBQUEUED) ret = 0; if (dio->result) { transferred = dio->result; /* Check for short read case */ if ((dio->op == REQ_OP_READ) && ((offset + transferred) > dio->i_size)) transferred = dio->i_size - offset; /* ignore EFAULT if some IO has been done */ if (unlikely(ret == -EFAULT) && transferred) ret = 0; } if (ret == 0) ret = dio->page_errors; if (ret == 0) ret = dio->io_error; if (ret == 0) ret = transferred; if (dio->end_io) { int err; // XXX: ki_pos?? err = dio->end_io(dio->iocb, offset, ret, dio->private); if (err) ret = err; } if (!(dio->flags & DIO_SKIP_DIO_COUNT)) inode_dio_end(dio->inode); if (is_async) { /* * generic_write_sync expects ki_pos to have been updated * already, but the submission path only does this for * synchronous I/O. */ dio->iocb->ki_pos += transferred; if (dio->op == REQ_OP_WRITE) ret = generic_write_sync(dio->iocb, transferred); dio->iocb->ki_complete(dio->iocb, ret, 0); } kmem_cache_free(dio_cache, dio); return ret; } static void dio_aio_complete_work(struct work_struct *work) { struct dio *dio = container_of(work, struct dio, complete_work); dio_complete(dio, 0, true); } static int dio_bio_complete(struct dio *dio, struct bio *bio); /* * Asynchronous IO callback. */ static void dio_bio_end_aio(struct bio *bio) { struct dio *dio = bio->bi_private; unsigned long remaining; unsigned long flags; /* cleanup the bio */ dio_bio_complete(dio, bio); spin_lock_irqsave(&dio->bio_lock, flags); remaining = --dio->refcount; if (remaining == 1 && dio->waiter) wake_up_process(dio->waiter); spin_unlock_irqrestore(&dio->bio_lock, flags); if (remaining == 0) { if (dio->result && dio->defer_completion) { INIT_WORK(&dio->complete_work, dio_aio_complete_work); queue_work(dio->inode->i_sb->s_dio_done_wq, &dio->complete_work); } else { dio_complete(dio, 0, true); } } } /* * The BIO completion handler simply queues the BIO up for the process-context * handler. * * During I/O bi_private points at the dio. After I/O, bi_private is used to * implement a singly-linked list of completed BIOs, at dio->bio_list. */ static void dio_bio_end_io(struct bio *bio) { struct dio *dio = bio->bi_private; unsigned long flags; spin_lock_irqsave(&dio->bio_lock, flags); bio->bi_private = dio->bio_list; dio->bio_list = bio; if (--dio->refcount == 1 && dio->waiter) wake_up_process(dio->waiter); spin_unlock_irqrestore(&dio->bio_lock, flags); } /** * dio_end_io - handle the end io action for the given bio * @bio: The direct io bio thats being completed * @error: Error if there was one * * This is meant to be called by any filesystem that uses their own dio_submit_t * so that the DIO specific endio actions are dealt with after the filesystem * has done it's completion work. */ void dio_end_io(struct bio *bio, int error) { struct dio *dio = bio->bi_private; if (dio->is_async) dio_bio_end_aio(bio); else dio_bio_end_io(bio); } EXPORT_SYMBOL_GPL(dio_end_io); static inline void dio_bio_alloc(struct dio *dio, struct dio_submit *sdio, struct block_device *bdev, sector_t first_sector, int nr_vecs) { struct bio *bio; /* * bio_alloc() is guaranteed to return a bio when called with * __GFP_RECLAIM and we request a valid number of vectors. */ bio = bio_alloc(GFP_KERNEL, nr_vecs); bio->bi_bdev = bdev; bio->bi_iter.bi_sector = first_sector; bio_set_op_attrs(bio, dio->op, dio->op_flags); if (dio->is_async) bio->bi_end_io = dio_bio_end_aio; else bio->bi_end_io = dio_bio_end_io; sdio->bio = bio; sdio->logical_offset_in_bio = sdio->cur_page_fs_offset; hie_set_dio_crypt_context(dio->inode, bio, sdio->cur_page_fs_offset); } /* * In the AIO read case we speculatively dirty the pages before starting IO. * During IO completion, any of these pages which happen to have been written * back will be redirtied by bio_check_pages_dirty(). * * bios hold a dio reference between submit_bio and ->end_io. */ static inline void dio_bio_submit(struct dio *dio, struct dio_submit *sdio) { struct bio *bio = sdio->bio; unsigned long flags; bio->bi_private = dio; spin_lock_irqsave(&dio->bio_lock, flags); dio->refcount++; spin_unlock_irqrestore(&dio->bio_lock, flags); if (dio->is_async && dio->op == REQ_OP_READ && dio->should_dirty) bio_set_pages_dirty(bio); dio->bio_bdev = bio->bi_bdev; blk_throtl_get_quota(bio->bi_bdev, bio->bi_iter.bi_size, msecs_to_jiffies(100), true); if (sdio->submit_io) { sdio->submit_io(bio, dio->inode, sdio->logical_offset_in_bio); dio->bio_cookie = BLK_QC_T_NONE; } else dio->bio_cookie = submit_bio(bio); sdio->bio = NULL; sdio->boundary = 0; sdio->logical_offset_in_bio = 0; } /* * Release any resources in case of a failure */ static inline void dio_cleanup(struct dio *dio, struct dio_submit *sdio) { while (sdio->head < sdio->tail) put_page(dio->pages[sdio->head++]); } /* * Wait for the next BIO to complete. Remove it and return it. NULL is * returned once all BIOs have been completed. This must only be called once * all bios have been issued so that dio->refcount can only decrease. This * requires that that the caller hold a reference on the dio. */ static struct bio *dio_await_one(struct dio *dio) { unsigned long flags; struct bio *bio = NULL; spin_lock_irqsave(&dio->bio_lock, flags); /* * Wait as long as the list is empty and there are bios in flight. bio * completion drops the count, maybe adds to the list, and wakes while * holding the bio_lock so we don't need set_current_state()'s barrier * and can call it after testing our condition. */ while (dio->refcount > 1 && dio->bio_list == NULL) { __set_current_state(TASK_UNINTERRUPTIBLE); dio->waiter = current; spin_unlock_irqrestore(&dio->bio_lock, flags); if (!(dio->iocb->ki_flags & IOCB_HIPRI) || !blk_poll(bdev_get_queue(dio->bio_bdev), dio->bio_cookie)) io_schedule(); /* wake up sets us TASK_RUNNING */ spin_lock_irqsave(&dio->bio_lock, flags); dio->waiter = NULL; } if (dio->bio_list) { bio = dio->bio_list; dio->bio_list = bio->bi_private; } spin_unlock_irqrestore(&dio->bio_lock, flags); return bio; } /* * Process one completed BIO. No locks are held. */ static int dio_bio_complete(struct dio *dio, struct bio *bio) { struct bio_vec *bvec; unsigned i; int err; if (bio->bi_error) dio->io_error = -EIO; if (dio->is_async && dio->op == REQ_OP_READ && dio->should_dirty) { err = bio->bi_error; bio_check_pages_dirty(bio); /* transfers ownership */ } else { bio_for_each_segment_all(bvec, bio, i) { struct page *page = bvec->bv_page; if (dio->op == REQ_OP_READ && !PageCompound(page) && dio->should_dirty) set_page_dirty_lock(page); put_page(page); } err = bio->bi_error; bio_put(bio); } return err; } /* * Wait on and process all in-flight BIOs. This must only be called once * all bios have been issued so that the refcount can only decrease. * This just waits for all bios to make it through dio_bio_complete. IO * errors are propagated through dio->io_error and should be propagated via * dio_complete(). */ static void dio_await_completion(struct dio *dio) { struct bio *bio; do { bio = dio_await_one(dio); if (bio) dio_bio_complete(dio, bio); } while (bio); } /* * A really large O_DIRECT read or write can generate a lot of BIOs. So * to keep the memory consumption sane we periodically reap any completed BIOs * during the BIO generation phase. * * This also helps to limit the peak amount of pinned userspace memory. */ static inline int dio_bio_reap(struct dio *dio, struct dio_submit *sdio) { int ret = 0; if (sdio->reap_counter++ >= 64) { while (dio->bio_list) { unsigned long flags; struct bio *bio; int ret2; spin_lock_irqsave(&dio->bio_lock, flags); bio = dio->bio_list; dio->bio_list = bio->bi_private; spin_unlock_irqrestore(&dio->bio_lock, flags); ret2 = dio_bio_complete(dio, bio); if (ret == 0) ret = ret2; } sdio->reap_counter = 0; } return ret; } /* * Create workqueue for deferred direct IO completions. We allocate the * workqueue when it's first needed. This avoids creating workqueue for * filesystems that don't need it and also allows us to create the workqueue * late enough so the we can include s_id in the name of the workqueue. */ static int sb_init_dio_done_wq(struct super_block *sb) { struct workqueue_struct *old; struct workqueue_struct *wq = alloc_workqueue("dio/%s", WQ_MEM_RECLAIM, 0, sb->s_id); if (!wq) return -ENOMEM; /* * This has to be atomic as more DIOs can race to create the workqueue */ old = cmpxchg(&sb->s_dio_done_wq, NULL, wq); /* Someone created workqueue before us? Free ours... */ if (old) destroy_workqueue(wq); return 0; } static int dio_set_defer_completion(struct dio *dio) { struct super_block *sb = dio->inode->i_sb; if (dio->defer_completion) return 0; dio->defer_completion = true; if (!sb->s_dio_done_wq) return sb_init_dio_done_wq(sb); return 0; } /* * Call into the fs to map some more disk blocks. We record the current number * of available blocks at sdio->blocks_available. These are in units of the * fs blocksize, i_blocksize(inode). * * The fs is allowed to map lots of blocks at once. If it wants to do that, * it uses the passed inode-relative block number as the file offset, as usual. * * get_block() is passed the number of i_blkbits-sized blocks which direct_io * has remaining to do. The fs should not map more than this number of blocks. * * If the fs has mapped a lot of blocks, it should populate bh->b_size to * indicate how much contiguous disk space has been made available at * bh->b_blocknr. * * If *any* of the mapped blocks are new, then the fs must set buffer_new(). * This isn't very efficient... * * In the case of filesystem holes: the fs may return an arbitrarily-large * hole by returning an appropriate value in b_size and by clearing * buffer_mapped(). However the direct-io code will only process holes one * block at a time - it will repeatedly call get_block() as it walks the hole. */ static int get_more_blocks(struct dio *dio, struct dio_submit *sdio, struct buffer_head *map_bh) { int ret; sector_t fs_startblk; /* Into file, in filesystem-sized blocks */ sector_t fs_endblk; /* Into file, in filesystem-sized blocks */ unsigned long fs_count; /* Number of filesystem-sized blocks */ int create; unsigned int i_blkbits = sdio->blkbits + sdio->blkfactor; /* * If there was a memory error and we've overwritten all the * mapped blocks then we can now return that memory error */ ret = dio->page_errors; if (ret == 0) { BUG_ON(sdio->block_in_file >= sdio->final_block_in_request); fs_startblk = sdio->block_in_file >> sdio->blkfactor; fs_endblk = (sdio->final_block_in_request - 1) >> sdio->blkfactor; fs_count = fs_endblk - fs_startblk + 1; map_bh->b_state = 0; map_bh->b_size = fs_count << i_blkbits; /* * For writes that could fill holes inside i_size on a * DIO_SKIP_HOLES filesystem we forbid block creations: only * overwrites are permitted. We will return early to the caller * once we see an unmapped buffer head returned, and the caller * will fall back to buffered I/O. * * Otherwise the decision is left to the get_blocks method, * which may decide to handle it or also return an unmapped * buffer head. */ create = dio->op == REQ_OP_WRITE; if (dio->flags & DIO_SKIP_HOLES) { if (fs_startblk <= ((i_size_read(dio->inode) - 1) >> i_blkbits)) create = 0; } ret = (*sdio->get_block)(dio->inode, fs_startblk, map_bh, create); /* Store for completion */ dio->private = map_bh->b_private; if (ret == 0 && buffer_defer_completion(map_bh)) ret = dio_set_defer_completion(dio); } return ret; } /* * There is no bio. Make one now. */ static inline int dio_new_bio(struct dio *dio, struct dio_submit *sdio, sector_t start_sector, struct buffer_head *map_bh) { sector_t sector; int ret, nr_pages; ret = dio_bio_reap(dio, sdio); if (ret) goto out; sector = start_sector << (sdio->blkbits - 9); nr_pages = min(sdio->pages_in_io, BIO_MAX_PAGES); BUG_ON(nr_pages <= 0); dio_bio_alloc(dio, sdio, map_bh->b_bdev, sector, nr_pages); sdio->boundary = 0; out: return ret; } /* * Attempt to put the current chunk of 'cur_page' into the current BIO. If * that was successful then update final_block_in_bio and take a ref against * the just-added page. * * Return zero on success. Non-zero means the caller needs to start a new BIO. */ static inline int dio_bio_add_page(struct dio_submit *sdio) { int ret; ret = bio_add_page(sdio->bio, sdio->cur_page, sdio->cur_page_len, sdio->cur_page_offset); if (ret == sdio->cur_page_len) { /* * Decrement count only, if we are done with this page */ if ((sdio->cur_page_len + sdio->cur_page_offset) == PAGE_SIZE) sdio->pages_in_io--; get_page(sdio->cur_page); sdio->final_block_in_bio = sdio->cur_page_block + (sdio->cur_page_len >> sdio->blkbits); ret = 0; } else { ret = 1; } return ret; } /* * Put cur_page under IO. The section of cur_page which is described by * cur_page_offset,cur_page_len is put into a BIO. The section of cur_page * starts on-disk at cur_page_block. * * We take a ref against the page here (on behalf of its presence in the bio). * * The caller of this function is responsible for removing cur_page from the * dio, and for dropping the refcount which came from that presence. */ static inline int dio_send_cur_page(struct dio *dio, struct dio_submit *sdio, struct buffer_head *map_bh) { int ret = 0; if (sdio->bio) { loff_t cur_offset = sdio->cur_page_fs_offset; loff_t bio_next_offset = sdio->logical_offset_in_bio + sdio->bio->bi_iter.bi_size; /* * See whether this new request is contiguous with the old. * * Btrfs cannot handle having logically non-contiguous requests * submitted. For example if you have * * Logical: [0-4095][HOLE][8192-12287] * Physical: [0-4095] [4096-8191] * * We cannot submit those pages together as one BIO. So if our * current logical offset in the file does not equal what would * be the next logical offset in the bio, submit the bio we * have. */ if (sdio->final_block_in_bio != sdio->cur_page_block || cur_offset != bio_next_offset) dio_bio_submit(dio, sdio); } if (sdio->bio == NULL) { ret = dio_new_bio(dio, sdio, sdio->cur_page_block, map_bh); if (ret) goto out; } if (dio_bio_add_page(sdio) != 0) { dio_bio_submit(dio, sdio); ret = dio_new_bio(dio, sdio, sdio->cur_page_block, map_bh); if (ret == 0) { ret = dio_bio_add_page(sdio); BUG_ON(ret != 0); } } out: return ret; } /* * An autonomous function to put a chunk of a page under deferred IO. * * The caller doesn't actually know (or care) whether this piece of page is in * a BIO, or is under IO or whatever. We just take care of all possible * situations here. The separation between the logic of do_direct_IO() and * that of submit_page_section() is important for clarity. Please don't break. * * The chunk of page starts on-disk at blocknr. * * We perform deferred IO, by recording the last-submitted page inside our * private part of the dio structure. If possible, we just expand the IO * across that page here. * * If that doesn't work out then we put the old page into the bio and add this * page to the dio instead. */ static inline int submit_page_section(struct dio *dio, struct dio_submit *sdio, struct page *page, unsigned offset, unsigned len, sector_t blocknr, struct buffer_head *map_bh) { int ret = 0; if (dio->op == REQ_OP_WRITE) { /* * Read accounting is performed in submit_bio() */ task_io_account_write(len); } /* * Can we just grow the current page's presence in the dio? */ if (sdio->cur_page == page && sdio->cur_page_offset + sdio->cur_page_len == offset && sdio->cur_page_block + (sdio->cur_page_len >> sdio->blkbits) == blocknr) { sdio->cur_page_len += len; goto out; } /* * If there's a deferred page already there then send it. */ if (sdio->cur_page) { ret = dio_send_cur_page(dio, sdio, map_bh); put_page(sdio->cur_page); sdio->cur_page = NULL; if (ret) return ret; } get_page(page); /* It is in dio */ sdio->cur_page = page; sdio->cur_page_offset = offset; sdio->cur_page_len = len; sdio->cur_page_block = blocknr; sdio->cur_page_fs_offset = sdio->block_in_file << sdio->blkbits; out: /* * If sdio->boundary then we want to schedule the IO now to * avoid metadata seeks. */ if (sdio->boundary) { ret = dio_send_cur_page(dio, sdio, map_bh); if (sdio->bio) dio_bio_submit(dio, sdio); put_page(sdio->cur_page); sdio->cur_page = NULL; } return ret; } /* * Clean any dirty buffers in the blockdev mapping which alias newly-created * file blocks. Only called for S_ISREG files - blockdevs do not set * buffer_new */ static void clean_blockdev_aliases(struct dio *dio, struct buffer_head *map_bh) { unsigned i; unsigned nblocks; nblocks = map_bh->b_size >> dio->inode->i_blkbits; for (i = 0; i < nblocks; i++) { unmap_underlying_metadata(map_bh->b_bdev, map_bh->b_blocknr + i); } } /* * If we are not writing the entire block and get_block() allocated * the block for us, we need to fill-in the unused portion of the * block with zeros. This happens only if user-buffer, fileoffset or * io length is not filesystem block-size multiple. * * `end' is zero if we're doing the start of the IO, 1 at the end of the * IO. */ static inline void dio_zero_block(struct dio *dio, struct dio_submit *sdio, int end, struct buffer_head *map_bh) { unsigned dio_blocks_per_fs_block; unsigned this_chunk_blocks; /* In dio_blocks */ unsigned this_chunk_bytes; struct page *page; sdio->start_zero_done = 1; if (!sdio->blkfactor || !buffer_new(map_bh)) return; dio_blocks_per_fs_block = 1 << sdio->blkfactor; this_chunk_blocks = sdio->block_in_file & (dio_blocks_per_fs_block - 1); if (!this_chunk_blocks) return; /* * We need to zero out part of an fs block. It is either at the * beginning or the end of the fs block. */ if (end) this_chunk_blocks = dio_blocks_per_fs_block - this_chunk_blocks; this_chunk_bytes = this_chunk_blocks << sdio->blkbits; page = ZERO_PAGE(0); if (submit_page_section(dio, sdio, page, 0, this_chunk_bytes, sdio->next_block_for_io, map_bh)) return; sdio->next_block_for_io += this_chunk_blocks; } /* * Walk the user pages, and the file, mapping blocks to disk and generating * a sequence of (page,offset,len,block) mappings. These mappings are injected * into submit_page_section(), which takes care of the next stage of submission * * Direct IO against a blockdev is different from a file. Because we can * happily perform page-sized but 512-byte aligned IOs. It is important that * blockdev IO be able to have fine alignment and large sizes. * * So what we do is to permit the ->get_block function to populate bh.b_size * with the size of IO which is permitted at this offset and this i_blkbits. * * For best results, the blockdev should be set up with 512-byte i_blkbits and * it should set b_size to PAGE_SIZE or more inside get_block(). This gives * fine alignment but still allows this function to work in PAGE_SIZE units. */ static int do_direct_IO(struct dio *dio, struct dio_submit *sdio, struct buffer_head *map_bh) { const unsigned blkbits = sdio->blkbits; int ret = 0; while (sdio->block_in_file < sdio->final_block_in_request) { struct page *page; size_t from, to; page = dio_get_page(dio, sdio); if (IS_ERR(page)) { ret = PTR_ERR(page); goto out; } from = sdio->head ? 0 : sdio->from; to = (sdio->head == sdio->tail - 1) ? sdio->to : PAGE_SIZE; sdio->head++; while (from < to) { unsigned this_chunk_bytes; /* # of bytes mapped */ unsigned this_chunk_blocks; /* # of blocks */ unsigned u; #ifdef CONFIG_CGROUP_IOLIMIT if (dio->op == REQ_OP_WRITE) { io_write_bandwidth_control(PAGE_SIZE); } else { io_read_bandwidth_control(PAGE_SIZE); } #endif if (sdio->blocks_available == 0) { /* * Need to go and map some more disk */ unsigned long blkmask; unsigned long dio_remainder; ret = get_more_blocks(dio, sdio, map_bh); if (ret) { put_page(page); goto out; } if (!buffer_mapped(map_bh)) goto do_holes; sdio->blocks_available = map_bh->b_size >> sdio->blkbits; sdio->next_block_for_io = map_bh->b_blocknr << sdio->blkfactor; if (buffer_new(map_bh)) clean_blockdev_aliases(dio, map_bh); if (!sdio->blkfactor) goto do_holes; blkmask = (1 << sdio->blkfactor) - 1; dio_remainder = (sdio->block_in_file & blkmask); /* * If we are at the start of IO and that IO * starts partway into a fs-block, * dio_remainder will be non-zero. If the IO * is a read then we can simply advance the IO * cursor to the first block which is to be * read. But if the IO is a write and the * block was newly allocated we cannot do that; * the start of the fs block must be zeroed out * on-disk */ if (!buffer_new(map_bh)) sdio->next_block_for_io += dio_remainder; sdio->blocks_available -= dio_remainder; } do_holes: /* Handle holes */ if (!buffer_mapped(map_bh)) { loff_t i_size_aligned; /* AKPM: eargh, -ENOTBLK is a hack */ if (dio->op == REQ_OP_WRITE) { put_page(page); return -ENOTBLK; } /* * Be sure to account for a partial block as the * last block in the file */ i_size_aligned = ALIGN(i_size_read(dio->inode), 1 << blkbits); if (sdio->block_in_file >= i_size_aligned >> blkbits) { /* We hit eof */ put_page(page); goto out; } zero_user(page, from, 1 << blkbits); sdio->block_in_file++; from += 1 << blkbits; dio->result += 1 << blkbits; goto next_block; } /* * If we're performing IO which has an alignment which * is finer than the underlying fs, go check to see if * we must zero out the start of this block. */ if (unlikely(sdio->blkfactor && !sdio->start_zero_done)) dio_zero_block(dio, sdio, 0, map_bh); /* * Work out, in this_chunk_blocks, how much disk we * can add to this page */ this_chunk_blocks = sdio->blocks_available; u = (to - from) >> blkbits; if (this_chunk_blocks > u) this_chunk_blocks = u; u = sdio->final_block_in_request - sdio->block_in_file; if (this_chunk_blocks > u) this_chunk_blocks = u; this_chunk_bytes = this_chunk_blocks << blkbits; BUG_ON(this_chunk_bytes == 0); if (this_chunk_blocks == sdio->blocks_available) sdio->boundary = buffer_boundary(map_bh); ret = submit_page_section(dio, sdio, page, from, this_chunk_bytes, sdio->next_block_for_io, map_bh); if (ret) { put_page(page); goto out; } sdio->next_block_for_io += this_chunk_blocks; sdio->block_in_file += this_chunk_blocks; from += this_chunk_bytes; dio->result += this_chunk_bytes; sdio->blocks_available -= this_chunk_blocks; next_block: BUG_ON(sdio->block_in_file > sdio->final_block_in_request); if (sdio->block_in_file == sdio->final_block_in_request) break; } /* Drop the ref which was taken in get_user_pages() */ put_page(page); } out: return ret; } static inline int drop_refcount(struct dio *dio) { int ret2; unsigned long flags; /* * Sync will always be dropping the final ref and completing the * operation. AIO can if it was a broken operation described above or * in fact if all the bios race to complete before we get here. In * that case dio_complete() translates the EIOCBQUEUED into the proper * return code that the caller will hand to ->complete(). * * This is managed by the bio_lock instead of being an atomic_t so that * completion paths can drop their ref and use the remaining count to * decide to wake the submission path atomically. */ spin_lock_irqsave(&dio->bio_lock, flags); ret2 = --dio->refcount; spin_unlock_irqrestore(&dio->bio_lock, flags); return ret2; } /* * This is a library function for use by filesystem drivers. * * The locking rules are governed by the flags parameter: * - if the flags value contains DIO_LOCKING we use a fancy locking * scheme for dumb filesystems. * For writes this function is called under i_mutex and returns with * i_mutex held, for reads, i_mutex is not held on entry, but it is * taken and dropped again before returning. * - if the flags value does NOT contain DIO_LOCKING we don't use any * internal locking but rather rely on the filesystem to synchronize * direct I/O reads/writes versus each other and truncate. * * To help with locking against truncate we incremented the i_dio_count * counter before starting direct I/O, and decrement it once we are done. * Truncate can wait for it to reach zero to provide exclusion. It is * expected that filesystem provide exclusion between new direct I/O * and truncates. For DIO_LOCKING filesystems this is done by i_mutex, * but other filesystems need to take care of this on their own. * * NOTE: if you pass "sdio" to anything by pointer make sure that function * is always inlined. Otherwise gcc is unable to split the structure into * individual fields and will generate much worse code. This is important * for the whole file. */ static inline ssize_t do_blockdev_direct_IO(struct kiocb *iocb, struct inode *inode, struct block_device *bdev, struct iov_iter *iter, get_block_t get_block, dio_iodone_t end_io, dio_submit_t submit_io, int flags) { unsigned i_blkbits = ACCESS_ONCE(inode->i_blkbits); unsigned blkbits = i_blkbits; unsigned blocksize_mask = (1 << blkbits) - 1; ssize_t retval = -EINVAL; size_t count = iov_iter_count(iter); loff_t offset = iocb->ki_pos; loff_t end = offset + count; struct dio *dio; struct dio_submit sdio = { 0, }; struct buffer_head map_bh = { 0, }; struct blk_plug plug; unsigned long align = offset | iov_iter_alignment(iter); /* * Avoid references to bdev if not absolutely needed to give * the early prefetch in the caller enough time. */ if (align & blocksize_mask) { if (bdev) blkbits = blksize_bits(bdev_logical_block_size(bdev)); blocksize_mask = (1 << blkbits) - 1; if (align & blocksize_mask) goto out; } /* watch out for a 0 len io from a tricksy fs */ if (iov_iter_rw(iter) == READ && !iov_iter_count(iter)) return 0; dio = kmem_cache_alloc(dio_cache, GFP_KERNEL); retval = -ENOMEM; if (!dio) goto out; /* * Believe it or not, zeroing out the page array caused a .5% * performance regression in a database benchmark. So, we take * care to only zero out what's needed. */ memset(dio, 0, offsetof(struct dio, pages)); dio->flags = flags; if (dio->flags & DIO_LOCKING) { if (iov_iter_rw(iter) == READ) { struct address_space *mapping = iocb->ki_filp->f_mapping; /* will be released by direct_io_worker */ inode_lock(inode); retval = filemap_write_and_wait_range(mapping, offset, end - 1); if (retval) { inode_unlock(inode); kmem_cache_free(dio_cache, dio); goto out; } } } /* Once we sampled i_size check for reads beyond EOF */ dio->i_size = i_size_read(inode); if (iov_iter_rw(iter) == READ && offset >= dio->i_size) { if (dio->flags & DIO_LOCKING) inode_unlock(inode); kmem_cache_free(dio_cache, dio); retval = 0; goto out; } /* * For file extending writes updating i_size before data writeouts * complete can expose uninitialized blocks in dumb filesystems. * In that case we need to wait for I/O completion even if asked * for an asynchronous write. */ if (is_sync_kiocb(iocb)) dio->is_async = false; else if (!(dio->flags & DIO_ASYNC_EXTEND) && iov_iter_rw(iter) == WRITE && end > i_size_read(inode)) dio->is_async = false; else dio->is_async = true; dio->inode = inode; if (iov_iter_rw(iter) == WRITE) { dio->op = REQ_OP_WRITE; dio->op_flags = WRITE_ODIRECT; } else { dio->op = REQ_OP_READ; } /* * For AIO O_(D)SYNC writes we need to defer completions to a workqueue * so that we can call ->fsync. */ if (dio->is_async && iov_iter_rw(iter) == WRITE && ((iocb->ki_filp->f_flags & O_DSYNC) || IS_SYNC(iocb->ki_filp->f_mapping->host))) { retval = dio_set_defer_completion(dio); if (retval) { /* * We grab i_mutex only for reads so we don't have * to release it here */ kmem_cache_free(dio_cache, dio); goto out; } } /* * Will be decremented at I/O completion time. */ if (!(dio->flags & DIO_SKIP_DIO_COUNT)) inode_dio_begin(inode); retval = 0; sdio.blkbits = blkbits; sdio.blkfactor = i_blkbits - blkbits; sdio.block_in_file = offset >> blkbits; sdio.get_block = get_block; dio->end_io = end_io; sdio.submit_io = submit_io; sdio.final_block_in_bio = -1; sdio.next_block_for_io = -1; dio->iocb = iocb; spin_lock_init(&dio->bio_lock); dio->refcount = 1; dio->should_dirty = (iter->type == ITER_IOVEC); sdio.iter = iter; sdio.final_block_in_request = (offset + iov_iter_count(iter)) >> blkbits; /* * In case of non-aligned buffers, we may need 2 more * pages since we need to zero out first and last block. */ if (unlikely(sdio.blkfactor)) sdio.pages_in_io = 2; sdio.pages_in_io += iov_iter_npages(iter, INT_MAX); blk_start_plug(&plug); retval = do_direct_IO(dio, &sdio, &map_bh); if (retval) dio_cleanup(dio, &sdio); if (retval == -ENOTBLK) { /* * The remaining part of the request will be * be handled by buffered I/O when we return */ retval = 0; } /* * There may be some unwritten disk at the end of a part-written * fs-block-sized block. Go zero that now. */ dio_zero_block(dio, &sdio, 1, &map_bh); if (sdio.cur_page) { ssize_t ret2; ret2 = dio_send_cur_page(dio, &sdio, &map_bh); if (retval == 0) retval = ret2; put_page(sdio.cur_page); sdio.cur_page = NULL; } if (sdio.bio) dio_bio_submit(dio, &sdio); blk_finish_plug(&plug); /* * It is possible that, we return short IO due to end of file. * In that case, we need to release all the pages we got hold on. */ dio_cleanup(dio, &sdio); /* * All block lookups have been performed. For READ requests * we can let i_mutex go now that its achieved its purpose * of protecting us from looking up uninitialized blocks. */ if (iov_iter_rw(iter) == READ && (dio->flags & DIO_LOCKING)) inode_unlock(dio->inode); /* * The only time we want to leave bios in flight is when a successful * partial aio read or full aio write have been setup. In that case * bio completion will call aio_complete. The only time it's safe to * call aio_complete is when we return -EIOCBQUEUED, so we key on that. * This had *better* be the only place that raises -EIOCBQUEUED. */ BUG_ON(retval == -EIOCBQUEUED); if (dio->is_async && retval == 0 && dio->result && (iov_iter_rw(iter) == READ || dio->result == count)) retval = -EIOCBQUEUED; else dio_await_completion(dio); if (drop_refcount(dio) == 0) { retval = dio_complete(dio, retval, false); } else BUG_ON(retval != -EIOCBQUEUED); out: return retval; } ssize_t __blockdev_direct_IO(struct kiocb *iocb, struct inode *inode, struct block_device *bdev, struct iov_iter *iter, get_block_t get_block, dio_iodone_t end_io, dio_submit_t submit_io, int flags) { /* * The block device state is needed in the end to finally * submit everything. Since it's likely to be cache cold * prefetch it here as first thing to hide some of the * latency. * * Attempt to prefetch the pieces we likely need later. */ prefetch(&bdev->bd_disk->part_tbl); prefetch(bdev->bd_queue); prefetch((char *)bdev->bd_queue + SMP_CACHE_BYTES); return do_blockdev_direct_IO(iocb, inode, bdev, iter, get_block, end_io, submit_io, flags); } EXPORT_SYMBOL(__blockdev_direct_IO); static __init int dio_init(void) { dio_cache = KMEM_CACHE(dio, SLAB_PANIC); return 0; } module_init(dio_init)