622 lines
26 KiB
Text
622 lines
26 KiB
Text
ACPI Tables
|
|
-----------
|
|
The expectations of individual ACPI tables are discussed in the list that
|
|
follows.
|
|
|
|
If a section number is used, it refers to a section number in the ACPI
|
|
specification where the object is defined. If "Signature Reserved" is used,
|
|
the table signature (the first four bytes of the table) is the only portion
|
|
of the table recognized by the specification, and the actual table is defined
|
|
outside of the UEFI Forum (see Section 5.2.6 of the specification).
|
|
|
|
For ACPI on arm64, tables also fall into the following categories:
|
|
|
|
-- Required: DSDT, FADT, GTDT, MADT, MCFG, RSDP, SPCR, XSDT
|
|
|
|
-- Recommended: BERT, EINJ, ERST, HEST, PCCT, SSDT
|
|
|
|
-- Optional: BGRT, CPEP, CSRT, DBG2, DRTM, ECDT, FACS, FPDT, IORT,
|
|
MCHI, MPST, MSCT, NFIT, PMTT, RASF, SBST, SLIT, SPMI, SRAT, STAO,
|
|
TCPA, TPM2, UEFI, XENV
|
|
|
|
-- Not supported: BOOT, DBGP, DMAR, ETDT, HPET, IBFT, IVRS, LPIT,
|
|
MSDM, OEMx, PSDT, RSDT, SLIC, WAET, WDAT, WDRT, WPBT
|
|
|
|
Table Usage for ARMv8 Linux
|
|
----- ----------------------------------------------------------------
|
|
BERT Section 18.3 (signature == "BERT")
|
|
== Boot Error Record Table ==
|
|
Must be supplied if RAS support is provided by the platform. It
|
|
is recommended this table be supplied.
|
|
|
|
BOOT Signature Reserved (signature == "BOOT")
|
|
== simple BOOT flag table ==
|
|
Microsoft only table, will not be supported.
|
|
|
|
BGRT Section 5.2.22 (signature == "BGRT")
|
|
== Boot Graphics Resource Table ==
|
|
Optional, not currently supported, with no real use-case for an
|
|
ARM server.
|
|
|
|
CPEP Section 5.2.18 (signature == "CPEP")
|
|
== Corrected Platform Error Polling table ==
|
|
Optional, not currently supported, and not recommended until such
|
|
time as ARM-compatible hardware is available, and the specification
|
|
suitably modified.
|
|
|
|
CSRT Signature Reserved (signature == "CSRT")
|
|
== Core System Resources Table ==
|
|
Optional, not currently supported.
|
|
|
|
DBG2 Signature Reserved (signature == "DBG2")
|
|
== DeBuG port table 2 ==
|
|
License has changed and should be usable. Optional if used instead
|
|
of earlycon=<device> on the command line.
|
|
|
|
DBGP Signature Reserved (signature == "DBGP")
|
|
== DeBuG Port table ==
|
|
Microsoft only table, will not be supported.
|
|
|
|
DSDT Section 5.2.11.1 (signature == "DSDT")
|
|
== Differentiated System Description Table ==
|
|
A DSDT is required; see also SSDT.
|
|
|
|
ACPI tables contain only one DSDT but can contain one or more SSDTs,
|
|
which are optional. Each SSDT can only add to the ACPI namespace,
|
|
but cannot modify or replace anything in the DSDT.
|
|
|
|
DMAR Signature Reserved (signature == "DMAR")
|
|
== DMA Remapping table ==
|
|
x86 only table, will not be supported.
|
|
|
|
DRTM Signature Reserved (signature == "DRTM")
|
|
== Dynamic Root of Trust for Measurement table ==
|
|
Optional, not currently supported.
|
|
|
|
ECDT Section 5.2.16 (signature == "ECDT")
|
|
== Embedded Controller Description Table ==
|
|
Optional, not currently supported, but could be used on ARM if and
|
|
only if one uses the GPE_BIT field to represent an IRQ number, since
|
|
there are no GPE blocks defined in hardware reduced mode. This would
|
|
need to be modified in the ACPI specification.
|
|
|
|
EINJ Section 18.6 (signature == "EINJ")
|
|
== Error Injection table ==
|
|
This table is very useful for testing platform response to error
|
|
conditions; it allows one to inject an error into the system as
|
|
if it had actually occurred. However, this table should not be
|
|
shipped with a production system; it should be dynamically loaded
|
|
and executed with the ACPICA tools only during testing.
|
|
|
|
ERST Section 18.5 (signature == "ERST")
|
|
== Error Record Serialization Table ==
|
|
On a platform supports RAS, this table must be supplied if it is not
|
|
UEFI-based; if it is UEFI-based, this table may be supplied. When this
|
|
table is not present, UEFI run time service will be utilized to save
|
|
and retrieve hardware error information to and from a persistent store.
|
|
|
|
ETDT Signature Reserved (signature == "ETDT")
|
|
== Event Timer Description Table ==
|
|
Obsolete table, will not be supported.
|
|
|
|
FACS Section 5.2.10 (signature == "FACS")
|
|
== Firmware ACPI Control Structure ==
|
|
It is unlikely that this table will be terribly useful. If it is
|
|
provided, the Global Lock will NOT be used since it is not part of
|
|
the hardware reduced profile, and only 64-bit address fields will
|
|
be considered valid.
|
|
|
|
FADT Section 5.2.9 (signature == "FACP")
|
|
== Fixed ACPI Description Table ==
|
|
Required for arm64.
|
|
|
|
The HW_REDUCED_ACPI flag must be set. All of the fields that are
|
|
to be ignored when HW_REDUCED_ACPI is set are expected to be set to
|
|
zero.
|
|
|
|
If an FACS table is provided, the X_FIRMWARE_CTRL field is to be
|
|
used, not FIRMWARE_CTRL.
|
|
|
|
If PSCI is used (as is recommended), make sure that ARM_BOOT_ARCH is
|
|
filled in properly -- that the PSCI_COMPLIANT flag is set and that
|
|
PSCI_USE_HVC is set or unset as needed (see table 5-37).
|
|
|
|
For the DSDT that is also required, the X_DSDT field is to be used,
|
|
not the DSDT field.
|
|
|
|
FPDT Section 5.2.23 (signature == "FPDT")
|
|
== Firmware Performance Data Table ==
|
|
Optional, not currently supported.
|
|
|
|
GTDT Section 5.2.24 (signature == "GTDT")
|
|
== Generic Timer Description Table ==
|
|
Required for arm64.
|
|
|
|
HEST Section 18.3.2 (signature == "HEST")
|
|
== Hardware Error Source Table ==
|
|
ARM-specific error sources have been defined; please use those or the
|
|
PCI types such as type 6 (AER Root Port), 7 (AER Endpoint), or 8 (AER
|
|
Bridge), or use type 9 (Generic Hardware Error Source). Firmware first
|
|
error handling is possible if and only if Trusted Firmware is being
|
|
used on arm64.
|
|
|
|
Must be supplied if RAS support is provided by the platform. It
|
|
is recommended this table be supplied.
|
|
|
|
HPET Signature Reserved (signature == "HPET")
|
|
== High Precision Event timer Table ==
|
|
x86 only table, will not be supported.
|
|
|
|
IBFT Signature Reserved (signature == "IBFT")
|
|
== iSCSI Boot Firmware Table ==
|
|
Microsoft defined table, support TBD.
|
|
|
|
IORT Signature Reserved (signature == "IORT")
|
|
== Input Output Remapping Table ==
|
|
arm64 only table, required in order to describe IO topology, SMMUs,
|
|
and GIC ITSs, and how those various components are connected together,
|
|
such as identifying which components are behind which SMMUs/ITSs.
|
|
This table will only be required on certain SBSA platforms (e.g.,
|
|
when using GICv3-ITS and an SMMU); on SBSA Level 0 platforms, it
|
|
remains optional.
|
|
|
|
IVRS Signature Reserved (signature == "IVRS")
|
|
== I/O Virtualization Reporting Structure ==
|
|
x86_64 (AMD) only table, will not be supported.
|
|
|
|
LPIT Signature Reserved (signature == "LPIT")
|
|
== Low Power Idle Table ==
|
|
x86 only table as of ACPI 5.1; starting with ACPI 6.0, processor
|
|
descriptions and power states on ARM platforms should use the DSDT
|
|
and define processor container devices (_HID ACPI0010, Section 8.4,
|
|
and more specifically 8.4.3 and and 8.4.4).
|
|
|
|
MADT Section 5.2.12 (signature == "APIC")
|
|
== Multiple APIC Description Table ==
|
|
Required for arm64. Only the GIC interrupt controller structures
|
|
should be used (types 0xA - 0xF).
|
|
|
|
MCFG Signature Reserved (signature == "MCFG")
|
|
== Memory-mapped ConFiGuration space ==
|
|
If the platform supports PCI/PCIe, an MCFG table is required.
|
|
|
|
MCHI Signature Reserved (signature == "MCHI")
|
|
== Management Controller Host Interface table ==
|
|
Optional, not currently supported.
|
|
|
|
MPST Section 5.2.21 (signature == "MPST")
|
|
== Memory Power State Table ==
|
|
Optional, not currently supported.
|
|
|
|
MSCT Section 5.2.19 (signature == "MSCT")
|
|
== Maximum System Characteristic Table ==
|
|
Optional, not currently supported.
|
|
|
|
MSDM Signature Reserved (signature == "MSDM")
|
|
== Microsoft Data Management table ==
|
|
Microsoft only table, will not be supported.
|
|
|
|
NFIT Section 5.2.25 (signature == "NFIT")
|
|
== NVDIMM Firmware Interface Table ==
|
|
Optional, not currently supported.
|
|
|
|
OEMx Signature of "OEMx" only
|
|
== OEM Specific Tables ==
|
|
All tables starting with a signature of "OEM" are reserved for OEM
|
|
use. Since these are not meant to be of general use but are limited
|
|
to very specific end users, they are not recommended for use and are
|
|
not supported by the kernel for arm64.
|
|
|
|
PCCT Section 14.1 (signature == "PCCT)
|
|
== Platform Communications Channel Table ==
|
|
Recommend for use on arm64; use of PCC is recommended when using CPPC
|
|
to control performance and power for platform processors.
|
|
|
|
PMTT Section 5.2.21.12 (signature == "PMTT")
|
|
== Platform Memory Topology Table ==
|
|
Optional, not currently supported.
|
|
|
|
PSDT Section 5.2.11.3 (signature == "PSDT")
|
|
== Persistent System Description Table ==
|
|
Obsolete table, will not be supported.
|
|
|
|
RASF Section 5.2.20 (signature == "RASF")
|
|
== RAS Feature table ==
|
|
Optional, not currently supported.
|
|
|
|
RSDP Section 5.2.5 (signature == "RSD PTR")
|
|
== Root System Description PoinTeR ==
|
|
Required for arm64.
|
|
|
|
RSDT Section 5.2.7 (signature == "RSDT")
|
|
== Root System Description Table ==
|
|
Since this table can only provide 32-bit addresses, it is deprecated
|
|
on arm64, and will not be used. If provided, it will be ignored.
|
|
|
|
SBST Section 5.2.14 (signature == "SBST")
|
|
== Smart Battery Subsystem Table ==
|
|
Optional, not currently supported.
|
|
|
|
SLIC Signature Reserved (signature == "SLIC")
|
|
== Software LIcensing table ==
|
|
Microsoft only table, will not be supported.
|
|
|
|
SLIT Section 5.2.17 (signature == "SLIT")
|
|
== System Locality distance Information Table ==
|
|
Optional in general, but required for NUMA systems.
|
|
|
|
SPCR Signature Reserved (signature == "SPCR")
|
|
== Serial Port Console Redirection table ==
|
|
Required for arm64.
|
|
|
|
SPMI Signature Reserved (signature == "SPMI")
|
|
== Server Platform Management Interface table ==
|
|
Optional, not currently supported.
|
|
|
|
SRAT Section 5.2.16 (signature == "SRAT")
|
|
== System Resource Affinity Table ==
|
|
Optional, but if used, only the GICC Affinity structures are read.
|
|
To support arm64 NUMA, this table is required.
|
|
|
|
SSDT Section 5.2.11.2 (signature == "SSDT")
|
|
== Secondary System Description Table ==
|
|
These tables are a continuation of the DSDT; these are recommended
|
|
for use with devices that can be added to a running system, but can
|
|
also serve the purpose of dividing up device descriptions into more
|
|
manageable pieces.
|
|
|
|
An SSDT can only ADD to the ACPI namespace. It cannot modify or
|
|
replace existing device descriptions already in the namespace.
|
|
|
|
These tables are optional, however. ACPI tables should contain only
|
|
one DSDT but can contain many SSDTs.
|
|
|
|
STAO Signature Reserved (signature == "STAO")
|
|
== _STA Override table ==
|
|
Optional, but only necessary in virtualized environments in order to
|
|
hide devices from guest OSs.
|
|
|
|
TCPA Signature Reserved (signature == "TCPA")
|
|
== Trusted Computing Platform Alliance table ==
|
|
Optional, not currently supported, and may need changes to fully
|
|
interoperate with arm64.
|
|
|
|
TPM2 Signature Reserved (signature == "TPM2")
|
|
== Trusted Platform Module 2 table ==
|
|
Optional, not currently supported, and may need changes to fully
|
|
interoperate with arm64.
|
|
|
|
UEFI Signature Reserved (signature == "UEFI")
|
|
== UEFI ACPI data table ==
|
|
Optional, not currently supported. No known use case for arm64,
|
|
at present.
|
|
|
|
WAET Signature Reserved (signature == "WAET")
|
|
== Windows ACPI Emulated devices Table ==
|
|
Microsoft only table, will not be supported.
|
|
|
|
WDAT Signature Reserved (signature == "WDAT")
|
|
== Watch Dog Action Table ==
|
|
Microsoft only table, will not be supported.
|
|
|
|
WDRT Signature Reserved (signature == "WDRT")
|
|
== Watch Dog Resource Table ==
|
|
Microsoft only table, will not be supported.
|
|
|
|
WPBT Signature Reserved (signature == "WPBT")
|
|
== Windows Platform Binary Table ==
|
|
Microsoft only table, will not be supported.
|
|
|
|
XENV Signature Reserved (signature == "XENV")
|
|
== Xen project table ==
|
|
Optional, used only by Xen at present.
|
|
|
|
XSDT Section 5.2.8 (signature == "XSDT")
|
|
== eXtended System Description Table ==
|
|
Required for arm64.
|
|
|
|
|
|
ACPI Objects
|
|
------------
|
|
The expectations on individual ACPI objects that are likely to be used are
|
|
shown in the list that follows; any object not explicitly mentioned below
|
|
should be used as needed for a particular platform or particular subsystem,
|
|
such as power management or PCI.
|
|
|
|
Name Section Usage for ARMv8 Linux
|
|
---- ------------ -------------------------------------------------
|
|
_CCA 6.2.17 This method must be defined for all bus masters
|
|
on arm64 -- there are no assumptions made about
|
|
whether such devices are cache coherent or not.
|
|
The _CCA value is inherited by all descendants of
|
|
these devices so it does not need to be repeated.
|
|
Without _CCA on arm64, the kernel does not know what
|
|
to do about setting up DMA for the device.
|
|
|
|
NB: this method provides default cache coherency
|
|
attributes; the presence of an SMMU can be used to
|
|
modify that, however. For example, a master could
|
|
default to non-coherent, but be made coherent with
|
|
the appropriate SMMU configuration (see Table 17 of
|
|
the IORT specification, ARM Document DEN 0049B).
|
|
|
|
_CID 6.1.2 Use as needed, see also _HID.
|
|
|
|
_CLS 6.1.3 Use as needed, see also _HID.
|
|
|
|
_CPC 8.4.7.1 Use as needed, power management specific. CPPC is
|
|
recommended on arm64.
|
|
|
|
_CRS 6.2.2 Required on arm64.
|
|
|
|
_CSD 8.4.2.2 Use as needed, used only in conjunction with _CST.
|
|
|
|
_CST 8.4.2.1 Low power idle states (8.4.4) are recommended instead
|
|
of C-states.
|
|
|
|
_DDN 6.1.4 This field can be used for a device name. However,
|
|
it is meant for DOS device names (e.g., COM1), so be
|
|
careful of its use across OSes.
|
|
|
|
_DSD 6.2.5 To be used with caution. If this object is used, try
|
|
to use it within the constraints already defined by the
|
|
Device Properties UUID. Only in rare circumstances
|
|
should it be necessary to create a new _DSD UUID.
|
|
|
|
In either case, submit the _DSD definition along with
|
|
any driver patches for discussion, especially when
|
|
device properties are used. A driver will not be
|
|
considered complete without a corresponding _DSD
|
|
description. Once approved by kernel maintainers,
|
|
the UUID or device properties must then be registered
|
|
with the UEFI Forum; this may cause some iteration as
|
|
more than one OS will be registering entries.
|
|
|
|
_DSM 9.1.1 Do not use this method. It is not standardized, the
|
|
return values are not well documented, and it is
|
|
currently a frequent source of error.
|
|
|
|
\_GL 5.7.1 This object is not to be used in hardware reduced
|
|
mode, and therefore should not be used on arm64.
|
|
|
|
_GLK 6.5.7 This object requires a global lock be defined; there
|
|
is no global lock on arm64 since it runs in hardware
|
|
reduced mode. Hence, do not use this object on arm64.
|
|
|
|
\_GPE 5.3.1 This namespace is for x86 use only. Do not use it
|
|
on arm64.
|
|
|
|
_HID 6.1.5 This is the primary object to use in device probing,
|
|
though _CID and _CLS may also be used.
|
|
|
|
_INI 6.5.1 Not required, but can be useful in setting up devices
|
|
when UEFI leaves them in a state that may not be what
|
|
the driver expects before it starts probing.
|
|
|
|
_LPI 8.4.4.3 Recommended for use with processor definitions (_HID
|
|
ACPI0010) on arm64. See also _RDI.
|
|
|
|
_MLS 6.1.7 Highly recommended for use in internationalization.
|
|
|
|
_OFF 7.2.2 It is recommended to define this method for any device
|
|
that can be turned on or off.
|
|
|
|
_ON 7.2.3 It is recommended to define this method for any device
|
|
that can be turned on or off.
|
|
|
|
\_OS 5.7.3 This method will return "Linux" by default (this is
|
|
the value of the macro ACPI_OS_NAME on Linux). The
|
|
command line parameter acpi_os=<string> can be used
|
|
to set it to some other value.
|
|
|
|
_OSC 6.2.11 This method can be a global method in ACPI (i.e.,
|
|
\_SB._OSC), or it may be associated with a specific
|
|
device (e.g., \_SB.DEV0._OSC), or both. When used
|
|
as a global method, only capabilities published in
|
|
the ACPI specification are allowed. When used as
|
|
a device-specific method, the process described for
|
|
using _DSD MUST be used to create an _OSC definition;
|
|
out-of-process use of _OSC is not allowed. That is,
|
|
submit the device-specific _OSC usage description as
|
|
part of the kernel driver submission, get it approved
|
|
by the kernel community, then register it with the
|
|
UEFI Forum.
|
|
|
|
\_OSI 5.7.2 Deprecated on ARM64. As far as ACPI firmware is
|
|
concerned, _OSI is not to be used to determine what
|
|
sort of system is being used or what functionality
|
|
is provided. The _OSC method is to be used instead.
|
|
|
|
_PDC 8.4.1 Deprecated, do not use on arm64.
|
|
|
|
\_PIC 5.8.1 The method should not be used. On arm64, the only
|
|
interrupt model available is GIC.
|
|
|
|
\_PR 5.3.1 This namespace is for x86 use only on legacy systems.
|
|
Do not use it on arm64.
|
|
|
|
_PRT 6.2.13 Required as part of the definition of all PCI root
|
|
devices.
|
|
|
|
_PRx 7.3.8-11 Use as needed; power management specific. If _PR0 is
|
|
defined, _PR3 must also be defined.
|
|
|
|
_PSx 7.3.2-5 Use as needed; power management specific. If _PS0 is
|
|
defined, _PS3 must also be defined. If clocks or
|
|
regulators need adjusting to be consistent with power
|
|
usage, change them in these methods.
|
|
|
|
_RDI 8.4.4.4 Recommended for use with processor definitions (_HID
|
|
ACPI0010) on arm64. This should only be used in
|
|
conjunction with _LPI.
|
|
|
|
\_REV 5.7.4 Always returns the latest version of ACPI supported.
|
|
|
|
\_SB 5.3.1 Required on arm64; all devices must be defined in this
|
|
namespace.
|
|
|
|
_SLI 6.2.15 Use is recommended when SLIT table is in use.
|
|
|
|
_STA 6.3.7, It is recommended to define this method for any device
|
|
7.2.4 that can be turned on or off. See also the STAO table
|
|
that provides overrides to hide devices in virtualized
|
|
environments.
|
|
|
|
_SRS 6.2.16 Use as needed; see also _PRS.
|
|
|
|
_STR 6.1.10 Recommended for conveying device names to end users;
|
|
this is preferred over using _DDN.
|
|
|
|
_SUB 6.1.9 Use as needed; _HID or _CID are preferred.
|
|
|
|
_SUN 6.1.11 Use as needed, but recommended.
|
|
|
|
_SWS 7.4.3 Use as needed; power management specific; this may
|
|
require specification changes for use on arm64.
|
|
|
|
_UID 6.1.12 Recommended for distinguishing devices of the same
|
|
class; define it if at all possible.
|
|
|
|
|
|
|
|
|
|
ACPI Event Model
|
|
----------------
|
|
Do not use GPE block devices; these are not supported in the hardware reduced
|
|
profile used by arm64. Since there are no GPE blocks defined for use on ARM
|
|
platforms, ACPI events must be signaled differently.
|
|
|
|
There are two options: GPIO-signaled interrupts (Section 5.6.5), and
|
|
interrupt-signaled events (Section 5.6.9). Interrupt-signaled events are a
|
|
new feature in the ACPI 6.1 specification. Either -- or both -- can be used
|
|
on a given platform, and which to use may be dependent of limitations in any
|
|
given SoC. If possible, interrupt-signaled events are recommended.
|
|
|
|
|
|
ACPI Processor Control
|
|
----------------------
|
|
Section 8 of the ACPI specification changed significantly in version 6.0.
|
|
Processors should now be defined as Device objects with _HID ACPI0007; do
|
|
not use the deprecated Processor statement in ASL. All multiprocessor systems
|
|
should also define a hierarchy of processors, done with Processor Container
|
|
Devices (see Section 8.4.3.1, _HID ACPI0010); do not use processor aggregator
|
|
devices (Section 8.5) to describe processor topology. Section 8.4 of the
|
|
specification describes the semantics of these object definitions and how
|
|
they interrelate.
|
|
|
|
Most importantly, the processor hierarchy defined also defines the low power
|
|
idle states that are available to the platform, along with the rules for
|
|
determining which processors can be turned on or off and the circumstances
|
|
that control that. Without this information, the processors will run in
|
|
whatever power state they were left in by UEFI.
|
|
|
|
Note too, that the processor Device objects defined and the entries in the
|
|
MADT for GICs are expected to be in synchronization. The _UID of the Device
|
|
object must correspond to processor IDs used in the MADT.
|
|
|
|
It is recommended that CPPC (8.4.5) be used as the primary model for processor
|
|
performance control on arm64. C-states and P-states may become available at
|
|
some point in the future, but most current design work appears to favor CPPC.
|
|
|
|
Further, it is essential that the ARMv8 SoC provide a fully functional
|
|
implementation of PSCI; this will be the only mechanism supported by ACPI
|
|
to control CPU power state. Booting of secondary CPUs using the ACPI
|
|
parking protocol is possible, but discouraged, since only PSCI is supported
|
|
for ARM servers.
|
|
|
|
|
|
ACPI System Address Map Interfaces
|
|
----------------------------------
|
|
In Section 15 of the ACPI specification, several methods are mentioned as
|
|
possible mechanisms for conveying memory resource information to the kernel.
|
|
For arm64, we will only support UEFI for booting with ACPI, hence the UEFI
|
|
GetMemoryMap() boot service is the only mechanism that will be used.
|
|
|
|
|
|
ACPI Platform Error Interfaces (APEI)
|
|
-------------------------------------
|
|
The APEI tables supported are described above.
|
|
|
|
APEI requires the equivalent of an SCI and an NMI on ARMv8. The SCI is used
|
|
to notify the OSPM of errors that have occurred but can be corrected and the
|
|
system can continue correct operation, even if possibly degraded. The NMI is
|
|
used to indicate fatal errors that cannot be corrected, and require immediate
|
|
attention.
|
|
|
|
Since there is no direct equivalent of the x86 SCI or NMI, arm64 handles
|
|
these slightly differently. The SCI is handled as a high priority interrupt;
|
|
given that these are corrected (or correctable) errors being reported, this
|
|
is sufficient. The NMI is emulated as the highest priority interrupt
|
|
possible. This implies some caution must be used since there could be
|
|
interrupts at higher privilege levels or even interrupts at the same priority
|
|
as the emulated NMI. In Linux, this should not be the case but one should
|
|
be aware it could happen.
|
|
|
|
|
|
ACPI Objects Not Supported on ARM64
|
|
-----------------------------------
|
|
While this may change in the future, there are several classes of objects
|
|
that can be defined, but are not currently of general interest to ARM servers.
|
|
Some of these objects have x86 equivalents, and may actually make sense in ARM
|
|
servers. However, there is either no hardware available at present, or there
|
|
may not even be a non-ARM implementation yet. Hence, they are not currently
|
|
supported.
|
|
|
|
The following classes of objects are not supported:
|
|
|
|
-- Section 9.2: ambient light sensor devices
|
|
|
|
-- Section 9.3: battery devices
|
|
|
|
-- Section 9.4: lids (e.g., laptop lids)
|
|
|
|
-- Section 9.8.2: IDE controllers
|
|
|
|
-- Section 9.9: floppy controllers
|
|
|
|
-- Section 9.10: GPE block devices
|
|
|
|
-- Section 9.15: PC/AT RTC/CMOS devices
|
|
|
|
-- Section 9.16: user presence detection devices
|
|
|
|
-- Section 9.17: I/O APIC devices; all GICs must be enumerable via MADT
|
|
|
|
-- Section 9.18: time and alarm devices (see 9.15)
|
|
|
|
-- Section 10: power source and power meter devices
|
|
|
|
-- Section 11: thermal management
|
|
|
|
-- Section 12: embedded controllers interface
|
|
|
|
-- Section 13: SMBus interfaces
|
|
|
|
|
|
This also means that there is no support for the following objects:
|
|
|
|
Name Section Name Section
|
|
---- ------------ ---- ------------
|
|
_ALC 9.3.4 _FDM 9.10.3
|
|
_ALI 9.3.2 _FIX 6.2.7
|
|
_ALP 9.3.6 _GAI 10.4.5
|
|
_ALR 9.3.5 _GHL 10.4.7
|
|
_ALT 9.3.3 _GTM 9.9.2.1.1
|
|
_BCT 10.2.2.10 _LID 9.5.1
|
|
_BDN 6.5.3 _PAI 10.4.4
|
|
_BIF 10.2.2.1 _PCL 10.3.2
|
|
_BIX 10.2.2.1 _PIF 10.3.3
|
|
_BLT 9.2.3 _PMC 10.4.1
|
|
_BMA 10.2.2.4 _PMD 10.4.8
|
|
_BMC 10.2.2.12 _PMM 10.4.3
|
|
_BMD 10.2.2.11 _PRL 10.3.4
|
|
_BMS 10.2.2.5 _PSR 10.3.1
|
|
_BST 10.2.2.6 _PTP 10.4.2
|
|
_BTH 10.2.2.7 _SBS 10.1.3
|
|
_BTM 10.2.2.9 _SHL 10.4.6
|
|
_BTP 10.2.2.8 _STM 9.9.2.1.1
|
|
_DCK 6.5.2 _UPD 9.16.1
|
|
_EC 12.12 _UPP 9.16.2
|
|
_FDE 9.10.1 _WPC 10.5.2
|
|
_FDI 9.10.2 _WPP 10.5.3
|
|
|