48 lines
1.5 KiB
Text
48 lines
1.5 KiB
Text
Texas Instruments TWL family (twl4030) reset and power management module
|
|
|
|
The power management module inside the TWL family provides several facilities
|
|
to control the power resources, including power scripts. For now, the
|
|
binding only supports the complete shutdown of the system after poweroff.
|
|
|
|
Required properties:
|
|
- compatible : must be one of the following
|
|
"ti,twl4030-power"
|
|
"ti,twl4030-power-reset"
|
|
"ti,twl4030-power-idle"
|
|
"ti,twl4030-power-idle-osc-off"
|
|
|
|
The use of ti,twl4030-power-reset is recommended at least on
|
|
3530 that needs a special configuration for warm reset to work.
|
|
|
|
When using ti,twl4030-power-idle, the TI recommended configuration
|
|
for idle modes is loaded to the tlw4030 PMIC.
|
|
|
|
When using ti,twl4030-power-idle-osc-off, the TI recommended
|
|
configuration is used with the external oscillator being shut
|
|
down during off-idle. Note that this does not work on all boards
|
|
depending on how the external oscillator is wired.
|
|
|
|
Optional properties:
|
|
|
|
- ti,system-power-controller: This indicates that TWL4030 is the
|
|
power supply master of the system. With this flag, the chip will
|
|
initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
|
|
system poweroffs.
|
|
|
|
- ti,use_poweroff: Deprecated name for ti,system-power-controller
|
|
|
|
Example:
|
|
&i2c1 {
|
|
clock-frequency = <2600000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
interrupt-parent = <&intc>;
|
|
|
|
twl_power: power {
|
|
compatible = "ti,twl4030-power";
|
|
ti,use_poweroff;
|
|
};
|
|
};
|
|
};
|