383 lines
10 KiB
C
383 lines
10 KiB
C
/*
|
|
* Driver for the CS5535/CS5536 Multi-Function General Purpose Timers (MFGPT)
|
|
*
|
|
* Copyright (C) 2006, Advanced Micro Devices, Inc.
|
|
* Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
|
|
* Copyright (C) 2009 Andres Salomon <dilinger@collabora.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of version 2 of the GNU General Public License
|
|
* as published by the Free Software Foundation.
|
|
*
|
|
* The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/cs5535.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define DRV_NAME "cs5535-mfgpt"
|
|
|
|
static int mfgpt_reset_timers;
|
|
module_param_named(mfgptfix, mfgpt_reset_timers, int, 0644);
|
|
MODULE_PARM_DESC(mfgptfix, "Try to reset the MFGPT timers during init; "
|
|
"required by some broken BIOSes (ie, TinyBIOS < 0.99) or kexec "
|
|
"(1 = reset the MFGPT using an undocumented bit, "
|
|
"2 = perform a soft reset by unconfiguring all timers); "
|
|
"use what works best for you.");
|
|
|
|
struct cs5535_mfgpt_timer {
|
|
struct cs5535_mfgpt_chip *chip;
|
|
int nr;
|
|
};
|
|
|
|
static struct cs5535_mfgpt_chip {
|
|
DECLARE_BITMAP(avail, MFGPT_MAX_TIMERS);
|
|
resource_size_t base;
|
|
|
|
struct platform_device *pdev;
|
|
spinlock_t lock;
|
|
int initialized;
|
|
} cs5535_mfgpt_chip;
|
|
|
|
int cs5535_mfgpt_toggle_event(struct cs5535_mfgpt_timer *timer, int cmp,
|
|
int event, int enable)
|
|
{
|
|
uint32_t msr, mask, value, dummy;
|
|
int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
|
|
|
|
if (!timer) {
|
|
WARN_ON(1);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* The register maps for these are described in sections 6.17.1.x of
|
|
* the AMD Geode CS5536 Companion Device Data Book.
|
|
*/
|
|
switch (event) {
|
|
case MFGPT_EVENT_RESET:
|
|
/*
|
|
* XXX: According to the docs, we cannot reset timers above
|
|
* 6; that is, resets for 7 and 8 will be ignored. Is this
|
|
* a problem? -dilinger
|
|
*/
|
|
msr = MSR_MFGPT_NR;
|
|
mask = 1 << (timer->nr + 24);
|
|
break;
|
|
|
|
case MFGPT_EVENT_NMI:
|
|
msr = MSR_MFGPT_NR;
|
|
mask = 1 << (timer->nr + shift);
|
|
break;
|
|
|
|
case MFGPT_EVENT_IRQ:
|
|
msr = MSR_MFGPT_IRQ;
|
|
mask = 1 << (timer->nr + shift);
|
|
break;
|
|
|
|
default:
|
|
return -EIO;
|
|
}
|
|
|
|
rdmsr(msr, value, dummy);
|
|
|
|
if (enable)
|
|
value |= mask;
|
|
else
|
|
value &= ~mask;
|
|
|
|
wrmsr(msr, value, dummy);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_mfgpt_toggle_event);
|
|
|
|
int cs5535_mfgpt_set_irq(struct cs5535_mfgpt_timer *timer, int cmp, int *irq,
|
|
int enable)
|
|
{
|
|
uint32_t zsel, lpc, dummy;
|
|
int shift;
|
|
|
|
if (!timer) {
|
|
WARN_ON(1);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
|
|
* is using the same CMP of the timer's Siamese twin, the IRQ is set to
|
|
* 2, and we mustn't use nor change it.
|
|
* XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
|
|
* IRQ of the 1st. This can only happen if forcing an IRQ, calling this
|
|
* with *irq==0 is safe. Currently there _are_ no 2 drivers.
|
|
*/
|
|
rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
|
|
shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer->nr % 4) * 4;
|
|
if (((zsel >> shift) & 0xF) == 2)
|
|
return -EIO;
|
|
|
|
/* Choose IRQ: if none supplied, keep IRQ already set or use default */
|
|
if (!*irq)
|
|
*irq = (zsel >> shift) & 0xF;
|
|
if (!*irq)
|
|
*irq = CONFIG_CS5535_MFGPT_DEFAULT_IRQ;
|
|
|
|
/* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
|
|
if (*irq < 1 || *irq == 2 || *irq > 15)
|
|
return -EIO;
|
|
rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
|
|
if (lpc & (1 << *irq))
|
|
return -EIO;
|
|
|
|
/* All chosen and checked - go for it */
|
|
if (cs5535_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
|
|
return -EIO;
|
|
if (enable) {
|
|
zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
|
|
wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_mfgpt_set_irq);
|
|
|
|
struct cs5535_mfgpt_timer *cs5535_mfgpt_alloc_timer(int timer_nr, int domain)
|
|
{
|
|
struct cs5535_mfgpt_chip *mfgpt = &cs5535_mfgpt_chip;
|
|
struct cs5535_mfgpt_timer *timer = NULL;
|
|
unsigned long flags;
|
|
int max;
|
|
|
|
if (!mfgpt->initialized)
|
|
goto done;
|
|
|
|
/* only allocate timers from the working domain if requested */
|
|
if (domain == MFGPT_DOMAIN_WORKING)
|
|
max = 6;
|
|
else
|
|
max = MFGPT_MAX_TIMERS;
|
|
|
|
if (timer_nr >= max) {
|
|
/* programmer error. silly programmers! */
|
|
WARN_ON(1);
|
|
goto done;
|
|
}
|
|
|
|
spin_lock_irqsave(&mfgpt->lock, flags);
|
|
if (timer_nr < 0) {
|
|
unsigned long t;
|
|
|
|
/* try to find any available timer */
|
|
t = find_first_bit(mfgpt->avail, max);
|
|
/* set timer_nr to -1 if no timers available */
|
|
timer_nr = t < max ? (int) t : -1;
|
|
} else {
|
|
/* check if the requested timer's available */
|
|
if (!test_bit(timer_nr, mfgpt->avail))
|
|
timer_nr = -1;
|
|
}
|
|
|
|
if (timer_nr >= 0)
|
|
/* if timer_nr is not -1, it's an available timer */
|
|
__clear_bit(timer_nr, mfgpt->avail);
|
|
spin_unlock_irqrestore(&mfgpt->lock, flags);
|
|
|
|
if (timer_nr < 0)
|
|
goto done;
|
|
|
|
timer = kmalloc(sizeof(*timer), GFP_KERNEL);
|
|
if (!timer) {
|
|
/* aw hell */
|
|
spin_lock_irqsave(&mfgpt->lock, flags);
|
|
__set_bit(timer_nr, mfgpt->avail);
|
|
spin_unlock_irqrestore(&mfgpt->lock, flags);
|
|
goto done;
|
|
}
|
|
timer->chip = mfgpt;
|
|
timer->nr = timer_nr;
|
|
dev_info(&mfgpt->pdev->dev, "registered timer %d\n", timer_nr);
|
|
|
|
done:
|
|
return timer;
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_mfgpt_alloc_timer);
|
|
|
|
/*
|
|
* XXX: This frees the timer memory, but never resets the actual hardware
|
|
* timer. The old geode_mfgpt code did this; it would be good to figure
|
|
* out a way to actually release the hardware timer. See comments below.
|
|
*/
|
|
void cs5535_mfgpt_free_timer(struct cs5535_mfgpt_timer *timer)
|
|
{
|
|
unsigned long flags;
|
|
uint16_t val;
|
|
|
|
/* timer can be made available again only if never set up */
|
|
val = cs5535_mfgpt_read(timer, MFGPT_REG_SETUP);
|
|
if (!(val & MFGPT_SETUP_SETUP)) {
|
|
spin_lock_irqsave(&timer->chip->lock, flags);
|
|
__set_bit(timer->nr, timer->chip->avail);
|
|
spin_unlock_irqrestore(&timer->chip->lock, flags);
|
|
}
|
|
|
|
kfree(timer);
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_mfgpt_free_timer);
|
|
|
|
uint16_t cs5535_mfgpt_read(struct cs5535_mfgpt_timer *timer, uint16_t reg)
|
|
{
|
|
return inw(timer->chip->base + reg + (timer->nr * 8));
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_mfgpt_read);
|
|
|
|
void cs5535_mfgpt_write(struct cs5535_mfgpt_timer *timer, uint16_t reg,
|
|
uint16_t value)
|
|
{
|
|
outw(value, timer->chip->base + reg + (timer->nr * 8));
|
|
}
|
|
EXPORT_SYMBOL_GPL(cs5535_mfgpt_write);
|
|
|
|
/*
|
|
* This is a sledgehammer that resets all MFGPT timers. This is required by
|
|
* some broken BIOSes which leave the system in an unstable state
|
|
* (TinyBIOS 0.98, for example; fixed in 0.99). It's uncertain as to
|
|
* whether or not this secret MSR can be used to release individual timers.
|
|
* Jordan tells me that he and Mitch once played w/ it, but it's unclear
|
|
* what the results of that were (and they experienced some instability).
|
|
*/
|
|
static void reset_all_timers(void)
|
|
{
|
|
uint32_t val, dummy;
|
|
|
|
/* The following undocumented bit resets the MFGPT timers */
|
|
val = 0xFF; dummy = 0;
|
|
wrmsr(MSR_MFGPT_SETUP, val, dummy);
|
|
}
|
|
|
|
/*
|
|
* This is another sledgehammer to reset all MFGPT timers.
|
|
* Instead of using the undocumented bit method it clears
|
|
* IRQ, NMI and RESET settings.
|
|
*/
|
|
static void soft_reset(void)
|
|
{
|
|
int i;
|
|
struct cs5535_mfgpt_timer t;
|
|
|
|
for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
|
|
t.nr = i;
|
|
|
|
cs5535_mfgpt_toggle_event(&t, MFGPT_CMP1, MFGPT_EVENT_RESET, 0);
|
|
cs5535_mfgpt_toggle_event(&t, MFGPT_CMP2, MFGPT_EVENT_RESET, 0);
|
|
cs5535_mfgpt_toggle_event(&t, MFGPT_CMP1, MFGPT_EVENT_NMI, 0);
|
|
cs5535_mfgpt_toggle_event(&t, MFGPT_CMP2, MFGPT_EVENT_NMI, 0);
|
|
cs5535_mfgpt_toggle_event(&t, MFGPT_CMP1, MFGPT_EVENT_IRQ, 0);
|
|
cs5535_mfgpt_toggle_event(&t, MFGPT_CMP2, MFGPT_EVENT_IRQ, 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check whether any MFGPTs are available for the kernel to use. In most
|
|
* cases, firmware that uses AMD's VSA code will claim all timers during
|
|
* bootup; we certainly don't want to take them if they're already in use.
|
|
* In other cases (such as with VSAless OpenFirmware), the system firmware
|
|
* leaves timers available for us to use.
|
|
*/
|
|
static int scan_timers(struct cs5535_mfgpt_chip *mfgpt)
|
|
{
|
|
struct cs5535_mfgpt_timer timer = { .chip = mfgpt };
|
|
unsigned long flags;
|
|
int timers = 0;
|
|
uint16_t val;
|
|
int i;
|
|
|
|
/* bios workaround */
|
|
if (mfgpt_reset_timers == 1)
|
|
reset_all_timers();
|
|
else if (mfgpt_reset_timers == 2)
|
|
soft_reset();
|
|
|
|
/* just to be safe, protect this section w/ lock */
|
|
spin_lock_irqsave(&mfgpt->lock, flags);
|
|
for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
|
|
timer.nr = i;
|
|
val = cs5535_mfgpt_read(&timer, MFGPT_REG_SETUP);
|
|
if (!(val & MFGPT_SETUP_SETUP) || mfgpt_reset_timers == 2) {
|
|
__set_bit(i, mfgpt->avail);
|
|
timers++;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&mfgpt->lock, flags);
|
|
|
|
return timers;
|
|
}
|
|
|
|
static int cs5535_mfgpt_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
int err = -EIO, t;
|
|
|
|
if (mfgpt_reset_timers < 0 || mfgpt_reset_timers > 2) {
|
|
dev_err(&pdev->dev, "Bad mfgpt_reset_timers value: %i\n",
|
|
mfgpt_reset_timers);
|
|
goto done;
|
|
}
|
|
|
|
/* There are two ways to get the MFGPT base address; one is by
|
|
* fetching it from MSR_LBAR_MFGPT, the other is by reading the
|
|
* PCI BAR info. The latter method is easier (especially across
|
|
* different architectures), so we'll stick with that for now. If
|
|
* it turns out to be unreliable in the face of crappy BIOSes, we
|
|
* can always go back to using MSRs.. */
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "can't fetch device resource info\n");
|
|
goto done;
|
|
}
|
|
|
|
if (!request_region(res->start, resource_size(res), pdev->name)) {
|
|
dev_err(&pdev->dev, "can't request region\n");
|
|
goto done;
|
|
}
|
|
|
|
/* set up the driver-specific struct */
|
|
cs5535_mfgpt_chip.base = res->start;
|
|
cs5535_mfgpt_chip.pdev = pdev;
|
|
spin_lock_init(&cs5535_mfgpt_chip.lock);
|
|
|
|
dev_info(&pdev->dev, "reserved resource region %pR\n", res);
|
|
|
|
/* detect the available timers */
|
|
t = scan_timers(&cs5535_mfgpt_chip);
|
|
dev_info(&pdev->dev, "%d MFGPT timers available\n", t);
|
|
cs5535_mfgpt_chip.initialized = 1;
|
|
return 0;
|
|
|
|
done:
|
|
return err;
|
|
}
|
|
|
|
static struct platform_driver cs5535_mfgpt_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
},
|
|
.probe = cs5535_mfgpt_probe,
|
|
};
|
|
|
|
|
|
static int __init cs5535_mfgpt_init(void)
|
|
{
|
|
return platform_driver_register(&cs5535_mfgpt_driver);
|
|
}
|
|
|
|
module_init(cs5535_mfgpt_init);
|
|
|
|
MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
|
|
MODULE_DESCRIPTION("CS5535/CS5536 MFGPT timer driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|