256 lines
6.5 KiB
C
256 lines
6.5 KiB
C
/*
|
|
* Reset driver for NXP LPC18xx/43xx Reset Generation Unit (RGU).
|
|
*
|
|
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/reset-controller.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
/* LPC18xx RGU registers */
|
|
#define LPC18XX_RGU_CTRL0 0x100
|
|
#define LPC18XX_RGU_CTRL1 0x104
|
|
#define LPC18XX_RGU_ACTIVE_STATUS0 0x150
|
|
#define LPC18XX_RGU_ACTIVE_STATUS1 0x154
|
|
|
|
#define LPC18XX_RGU_RESETS_PER_REG 32
|
|
|
|
/* Internal reset outputs */
|
|
#define LPC18XX_RGU_CORE_RST 0
|
|
#define LPC43XX_RGU_M0SUB_RST 12
|
|
#define LPC43XX_RGU_M0APP_RST 56
|
|
|
|
struct lpc18xx_rgu_data {
|
|
struct reset_controller_dev rcdev;
|
|
struct notifier_block restart_nb;
|
|
struct clk *clk_delay;
|
|
struct clk *clk_reg;
|
|
void __iomem *base;
|
|
spinlock_t lock;
|
|
u32 delay_us;
|
|
};
|
|
|
|
#define to_rgu_data(p) container_of(p, struct lpc18xx_rgu_data, rcdev)
|
|
|
|
static int lpc18xx_rgu_restart(struct notifier_block *nb, unsigned long mode,
|
|
void *cmd)
|
|
{
|
|
struct lpc18xx_rgu_data *rc = container_of(nb, struct lpc18xx_rgu_data,
|
|
restart_nb);
|
|
|
|
writel(BIT(LPC18XX_RGU_CORE_RST), rc->base + LPC18XX_RGU_CTRL0);
|
|
mdelay(2000);
|
|
|
|
pr_emerg("%s: unable to restart system\n", __func__);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/*
|
|
* The LPC18xx RGU has mostly self-deasserting resets except for the
|
|
* two reset lines going to the internal Cortex-M0 cores.
|
|
*
|
|
* To prevent the M0 core resets from accidentally getting deasserted
|
|
* status register must be check and bits in control register set to
|
|
* preserve the state.
|
|
*/
|
|
static int lpc18xx_rgu_setclear_reset(struct reset_controller_dev *rcdev,
|
|
unsigned long id, bool set)
|
|
{
|
|
struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev);
|
|
u32 stat_offset = LPC18XX_RGU_ACTIVE_STATUS0;
|
|
u32 ctrl_offset = LPC18XX_RGU_CTRL0;
|
|
unsigned long flags;
|
|
u32 stat, rst_bit;
|
|
|
|
stat_offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32);
|
|
ctrl_offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32);
|
|
rst_bit = 1 << (id % LPC18XX_RGU_RESETS_PER_REG);
|
|
|
|
spin_lock_irqsave(&rc->lock, flags);
|
|
stat = ~readl(rc->base + stat_offset);
|
|
if (set)
|
|
writel(stat | rst_bit, rc->base + ctrl_offset);
|
|
else
|
|
writel(stat & ~rst_bit, rc->base + ctrl_offset);
|
|
spin_unlock_irqrestore(&rc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpc18xx_rgu_assert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
return lpc18xx_rgu_setclear_reset(rcdev, id, true);
|
|
}
|
|
|
|
static int lpc18xx_rgu_deassert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
return lpc18xx_rgu_setclear_reset(rcdev, id, false);
|
|
}
|
|
|
|
/* Only M0 cores require explicit reset deassert */
|
|
static int lpc18xx_rgu_reset(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev);
|
|
|
|
lpc18xx_rgu_assert(rcdev, id);
|
|
udelay(rc->delay_us);
|
|
|
|
switch (id) {
|
|
case LPC43XX_RGU_M0SUB_RST:
|
|
case LPC43XX_RGU_M0APP_RST:
|
|
lpc18xx_rgu_setclear_reset(rcdev, id, false);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpc18xx_rgu_status(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev);
|
|
u32 bit, offset = LPC18XX_RGU_ACTIVE_STATUS0;
|
|
|
|
offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32);
|
|
bit = 1 << (id % LPC18XX_RGU_RESETS_PER_REG);
|
|
|
|
return !(readl(rc->base + offset) & bit);
|
|
}
|
|
|
|
static const struct reset_control_ops lpc18xx_rgu_ops = {
|
|
.reset = lpc18xx_rgu_reset,
|
|
.assert = lpc18xx_rgu_assert,
|
|
.deassert = lpc18xx_rgu_deassert,
|
|
.status = lpc18xx_rgu_status,
|
|
};
|
|
|
|
static int lpc18xx_rgu_probe(struct platform_device *pdev)
|
|
{
|
|
struct lpc18xx_rgu_data *rc;
|
|
struct resource *res;
|
|
u32 fcclk, firc;
|
|
int ret;
|
|
|
|
rc = devm_kzalloc(&pdev->dev, sizeof(*rc), GFP_KERNEL);
|
|
if (!rc)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
rc->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(rc->base))
|
|
return PTR_ERR(rc->base);
|
|
|
|
rc->clk_reg = devm_clk_get(&pdev->dev, "reg");
|
|
if (IS_ERR(rc->clk_reg)) {
|
|
dev_err(&pdev->dev, "reg clock not found\n");
|
|
return PTR_ERR(rc->clk_reg);
|
|
}
|
|
|
|
rc->clk_delay = devm_clk_get(&pdev->dev, "delay");
|
|
if (IS_ERR(rc->clk_delay)) {
|
|
dev_err(&pdev->dev, "delay clock not found\n");
|
|
return PTR_ERR(rc->clk_delay);
|
|
}
|
|
|
|
ret = clk_prepare_enable(rc->clk_reg);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to enable reg clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(rc->clk_delay);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to enable delay clock\n");
|
|
goto dis_clk_reg;
|
|
}
|
|
|
|
fcclk = clk_get_rate(rc->clk_reg) / USEC_PER_SEC;
|
|
firc = clk_get_rate(rc->clk_delay) / USEC_PER_SEC;
|
|
if (fcclk == 0 || firc == 0)
|
|
rc->delay_us = 2;
|
|
else
|
|
rc->delay_us = DIV_ROUND_UP(fcclk, firc * firc);
|
|
|
|
spin_lock_init(&rc->lock);
|
|
|
|
rc->rcdev.owner = THIS_MODULE;
|
|
rc->rcdev.nr_resets = 64;
|
|
rc->rcdev.ops = &lpc18xx_rgu_ops;
|
|
rc->rcdev.of_node = pdev->dev.of_node;
|
|
|
|
platform_set_drvdata(pdev, rc);
|
|
|
|
ret = reset_controller_register(&rc->rcdev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to register device\n");
|
|
goto dis_clks;
|
|
}
|
|
|
|
rc->restart_nb.priority = 192,
|
|
rc->restart_nb.notifier_call = lpc18xx_rgu_restart,
|
|
ret = register_restart_handler(&rc->restart_nb);
|
|
if (ret)
|
|
dev_warn(&pdev->dev, "failed to register restart handler\n");
|
|
|
|
return 0;
|
|
|
|
dis_clks:
|
|
clk_disable_unprepare(rc->clk_delay);
|
|
dis_clk_reg:
|
|
clk_disable_unprepare(rc->clk_reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lpc18xx_rgu_remove(struct platform_device *pdev)
|
|
{
|
|
struct lpc18xx_rgu_data *rc = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = unregister_restart_handler(&rc->restart_nb);
|
|
if (ret)
|
|
dev_warn(&pdev->dev, "failed to unregister restart handler\n");
|
|
|
|
reset_controller_unregister(&rc->rcdev);
|
|
|
|
clk_disable_unprepare(rc->clk_delay);
|
|
clk_disable_unprepare(rc->clk_reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id lpc18xx_rgu_match[] = {
|
|
{ .compatible = "nxp,lpc1850-rgu" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lpc18xx_rgu_match);
|
|
|
|
static struct platform_driver lpc18xx_rgu_driver = {
|
|
.probe = lpc18xx_rgu_probe,
|
|
.remove = lpc18xx_rgu_remove,
|
|
.driver = {
|
|
.name = "lpc18xx-reset",
|
|
.of_match_table = lpc18xx_rgu_match,
|
|
},
|
|
};
|
|
module_platform_driver(lpc18xx_rgu_driver);
|
|
|
|
MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
|
|
MODULE_DESCRIPTION("Reset driver for LPC18xx/43xx RGU");
|
|
MODULE_LICENSE("GPL v2");
|