437 lines
11 KiB
C
437 lines
11 KiB
C
/*
|
|
* TXx9 SPI controller driver.
|
|
*
|
|
* Based on linux/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c
|
|
* Copyright (C) 2000-2001 Toshiba Corporation
|
|
*
|
|
* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
|
|
* terms of the GNU General Public License version 2. This program is
|
|
* licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*
|
|
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
|
|
*
|
|
* Convert to generic SPI framework - Atsushi Nemoto (anemo@mba.ocn.ne.jp)
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gpio.h>
|
|
|
|
|
|
#define SPI_FIFO_SIZE 4
|
|
#define SPI_MAX_DIVIDER 0xff /* Max. value for SPCR1.SER */
|
|
#define SPI_MIN_DIVIDER 1 /* Min. value for SPCR1.SER */
|
|
|
|
#define TXx9_SPMCR 0x00
|
|
#define TXx9_SPCR0 0x04
|
|
#define TXx9_SPCR1 0x08
|
|
#define TXx9_SPFS 0x0c
|
|
#define TXx9_SPSR 0x14
|
|
#define TXx9_SPDR 0x18
|
|
|
|
/* SPMCR : SPI Master Control */
|
|
#define TXx9_SPMCR_OPMODE 0xc0
|
|
#define TXx9_SPMCR_CONFIG 0x40
|
|
#define TXx9_SPMCR_ACTIVE 0x80
|
|
#define TXx9_SPMCR_SPSTP 0x02
|
|
#define TXx9_SPMCR_BCLR 0x01
|
|
|
|
/* SPCR0 : SPI Control 0 */
|
|
#define TXx9_SPCR0_TXIFL_MASK 0xc000
|
|
#define TXx9_SPCR0_RXIFL_MASK 0x3000
|
|
#define TXx9_SPCR0_SIDIE 0x0800
|
|
#define TXx9_SPCR0_SOEIE 0x0400
|
|
#define TXx9_SPCR0_RBSIE 0x0200
|
|
#define TXx9_SPCR0_TBSIE 0x0100
|
|
#define TXx9_SPCR0_IFSPSE 0x0010
|
|
#define TXx9_SPCR0_SBOS 0x0004
|
|
#define TXx9_SPCR0_SPHA 0x0002
|
|
#define TXx9_SPCR0_SPOL 0x0001
|
|
|
|
/* SPSR : SPI Status */
|
|
#define TXx9_SPSR_TBSI 0x8000
|
|
#define TXx9_SPSR_RBSI 0x4000
|
|
#define TXx9_SPSR_TBS_MASK 0x3800
|
|
#define TXx9_SPSR_RBS_MASK 0x0700
|
|
#define TXx9_SPSR_SPOE 0x0080
|
|
#define TXx9_SPSR_IFSD 0x0008
|
|
#define TXx9_SPSR_SIDLE 0x0004
|
|
#define TXx9_SPSR_STRDY 0x0002
|
|
#define TXx9_SPSR_SRRDY 0x0001
|
|
|
|
|
|
struct txx9spi {
|
|
struct work_struct work;
|
|
spinlock_t lock; /* protect 'queue' */
|
|
struct list_head queue;
|
|
wait_queue_head_t waitq;
|
|
void __iomem *membase;
|
|
int baseclk;
|
|
struct clk *clk;
|
|
int last_chipselect;
|
|
int last_chipselect_val;
|
|
};
|
|
|
|
static u32 txx9spi_rd(struct txx9spi *c, int reg)
|
|
{
|
|
return __raw_readl(c->membase + reg);
|
|
}
|
|
static void txx9spi_wr(struct txx9spi *c, u32 val, int reg)
|
|
{
|
|
__raw_writel(val, c->membase + reg);
|
|
}
|
|
|
|
static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c,
|
|
int on, unsigned int cs_delay)
|
|
{
|
|
int val = (spi->mode & SPI_CS_HIGH) ? on : !on;
|
|
|
|
if (on) {
|
|
/* deselect the chip with cs_change hint in last transfer */
|
|
if (c->last_chipselect >= 0)
|
|
gpio_set_value(c->last_chipselect,
|
|
!c->last_chipselect_val);
|
|
c->last_chipselect = spi->chip_select;
|
|
c->last_chipselect_val = val;
|
|
} else {
|
|
c->last_chipselect = -1;
|
|
ndelay(cs_delay); /* CS Hold Time */
|
|
}
|
|
gpio_set_value(spi->chip_select, val);
|
|
ndelay(cs_delay); /* CS Setup Time / CS Recovery Time */
|
|
}
|
|
|
|
static int txx9spi_setup(struct spi_device *spi)
|
|
{
|
|
struct txx9spi *c = spi_master_get_devdata(spi->master);
|
|
|
|
if (!spi->max_speed_hz)
|
|
return -EINVAL;
|
|
|
|
if (gpio_direction_output(spi->chip_select,
|
|
!(spi->mode & SPI_CS_HIGH))) {
|
|
dev_err(&spi->dev, "Cannot setup GPIO for chipselect.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* deselect chip */
|
|
spin_lock(&c->lock);
|
|
txx9spi_cs_func(spi, c, 0, (NSEC_PER_SEC / 2) / spi->max_speed_hz);
|
|
spin_unlock(&c->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t txx9spi_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct txx9spi *c = dev_id;
|
|
|
|
/* disable rx intr */
|
|
txx9spi_wr(c, txx9spi_rd(c, TXx9_SPCR0) & ~TXx9_SPCR0_RBSIE,
|
|
TXx9_SPCR0);
|
|
wake_up(&c->waitq);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m)
|
|
{
|
|
struct spi_device *spi = m->spi;
|
|
struct spi_transfer *t;
|
|
unsigned int cs_delay;
|
|
unsigned int cs_change = 1;
|
|
int status = 0;
|
|
u32 mcr;
|
|
u32 prev_speed_hz = 0;
|
|
u8 prev_bits_per_word = 0;
|
|
|
|
/* CS setup/hold/recovery time in nsec */
|
|
cs_delay = 100 + (NSEC_PER_SEC / 2) / spi->max_speed_hz;
|
|
|
|
mcr = txx9spi_rd(c, TXx9_SPMCR);
|
|
if (unlikely((mcr & TXx9_SPMCR_OPMODE) == TXx9_SPMCR_ACTIVE)) {
|
|
dev_err(&spi->dev, "Bad mode.\n");
|
|
status = -EIO;
|
|
goto exit;
|
|
}
|
|
mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
|
|
|
|
/* enter config mode */
|
|
txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
|
|
txx9spi_wr(c, TXx9_SPCR0_SBOS
|
|
| ((spi->mode & SPI_CPOL) ? TXx9_SPCR0_SPOL : 0)
|
|
| ((spi->mode & SPI_CPHA) ? TXx9_SPCR0_SPHA : 0)
|
|
| 0x08,
|
|
TXx9_SPCR0);
|
|
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
const void *txbuf = t->tx_buf;
|
|
void *rxbuf = t->rx_buf;
|
|
u32 data;
|
|
unsigned int len = t->len;
|
|
unsigned int wsize;
|
|
u32 speed_hz = t->speed_hz;
|
|
u8 bits_per_word = t->bits_per_word;
|
|
|
|
wsize = bits_per_word >> 3; /* in bytes */
|
|
|
|
if (prev_speed_hz != speed_hz
|
|
|| prev_bits_per_word != bits_per_word) {
|
|
int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1;
|
|
|
|
n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER);
|
|
/* enter config mode */
|
|
txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR,
|
|
TXx9_SPMCR);
|
|
txx9spi_wr(c, (n << 8) | bits_per_word, TXx9_SPCR1);
|
|
/* enter active mode */
|
|
txx9spi_wr(c, mcr | TXx9_SPMCR_ACTIVE, TXx9_SPMCR);
|
|
|
|
prev_speed_hz = speed_hz;
|
|
prev_bits_per_word = bits_per_word;
|
|
}
|
|
|
|
if (cs_change)
|
|
txx9spi_cs_func(spi, c, 1, cs_delay);
|
|
cs_change = t->cs_change;
|
|
while (len) {
|
|
unsigned int count = SPI_FIFO_SIZE;
|
|
int i;
|
|
u32 cr0;
|
|
|
|
if (len < count * wsize)
|
|
count = len / wsize;
|
|
/* now tx must be idle... */
|
|
while (!(txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_SIDLE))
|
|
cpu_relax();
|
|
cr0 = txx9spi_rd(c, TXx9_SPCR0);
|
|
cr0 &= ~TXx9_SPCR0_RXIFL_MASK;
|
|
cr0 |= (count - 1) << 12;
|
|
/* enable rx intr */
|
|
cr0 |= TXx9_SPCR0_RBSIE;
|
|
txx9spi_wr(c, cr0, TXx9_SPCR0);
|
|
/* send */
|
|
for (i = 0; i < count; i++) {
|
|
if (txbuf) {
|
|
data = (wsize == 1)
|
|
? *(const u8 *)txbuf
|
|
: *(const u16 *)txbuf;
|
|
txx9spi_wr(c, data, TXx9_SPDR);
|
|
txbuf += wsize;
|
|
} else
|
|
txx9spi_wr(c, 0, TXx9_SPDR);
|
|
}
|
|
/* wait all rx data */
|
|
wait_event(c->waitq,
|
|
txx9spi_rd(c, TXx9_SPSR) & TXx9_SPSR_RBSI);
|
|
/* receive */
|
|
for (i = 0; i < count; i++) {
|
|
data = txx9spi_rd(c, TXx9_SPDR);
|
|
if (rxbuf) {
|
|
if (wsize == 1)
|
|
*(u8 *)rxbuf = data;
|
|
else
|
|
*(u16 *)rxbuf = data;
|
|
rxbuf += wsize;
|
|
}
|
|
}
|
|
len -= count * wsize;
|
|
}
|
|
m->actual_length += t->len;
|
|
if (t->delay_usecs)
|
|
udelay(t->delay_usecs);
|
|
|
|
if (!cs_change)
|
|
continue;
|
|
if (t->transfer_list.next == &m->transfers)
|
|
break;
|
|
/* sometimes a short mid-message deselect of the chip
|
|
* may be needed to terminate a mode or command
|
|
*/
|
|
txx9spi_cs_func(spi, c, 0, cs_delay);
|
|
}
|
|
|
|
exit:
|
|
m->status = status;
|
|
if (m->complete)
|
|
m->complete(m->context);
|
|
|
|
/* normally deactivate chipselect ... unless no error and
|
|
* cs_change has hinted that the next message will probably
|
|
* be for this chip too.
|
|
*/
|
|
if (!(status == 0 && cs_change))
|
|
txx9spi_cs_func(spi, c, 0, cs_delay);
|
|
|
|
/* enter config mode */
|
|
txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
|
|
}
|
|
|
|
static void txx9spi_work(struct work_struct *work)
|
|
{
|
|
struct txx9spi *c = container_of(work, struct txx9spi, work);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&c->lock, flags);
|
|
while (!list_empty(&c->queue)) {
|
|
struct spi_message *m;
|
|
|
|
m = container_of(c->queue.next, struct spi_message, queue);
|
|
list_del_init(&m->queue);
|
|
spin_unlock_irqrestore(&c->lock, flags);
|
|
|
|
txx9spi_work_one(c, m);
|
|
|
|
spin_lock_irqsave(&c->lock, flags);
|
|
}
|
|
spin_unlock_irqrestore(&c->lock, flags);
|
|
}
|
|
|
|
static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
|
|
{
|
|
struct spi_master *master = spi->master;
|
|
struct txx9spi *c = spi_master_get_devdata(master);
|
|
struct spi_transfer *t;
|
|
unsigned long flags;
|
|
|
|
m->actual_length = 0;
|
|
|
|
/* check each transfer's parameters */
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if (!t->tx_buf && !t->rx_buf && t->len)
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&c->lock, flags);
|
|
list_add_tail(&m->queue, &c->queue);
|
|
schedule_work(&c->work);
|
|
spin_unlock_irqrestore(&c->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int txx9spi_probe(struct platform_device *dev)
|
|
{
|
|
struct spi_master *master;
|
|
struct txx9spi *c;
|
|
struct resource *res;
|
|
int ret = -ENODEV;
|
|
u32 mcr;
|
|
int irq;
|
|
|
|
master = spi_alloc_master(&dev->dev, sizeof(*c));
|
|
if (!master)
|
|
return ret;
|
|
c = spi_master_get_devdata(master);
|
|
platform_set_drvdata(dev, master);
|
|
|
|
INIT_WORK(&c->work, txx9spi_work);
|
|
spin_lock_init(&c->lock);
|
|
INIT_LIST_HEAD(&c->queue);
|
|
init_waitqueue_head(&c->waitq);
|
|
|
|
c->clk = devm_clk_get(&dev->dev, "spi-baseclk");
|
|
if (IS_ERR(c->clk)) {
|
|
ret = PTR_ERR(c->clk);
|
|
c->clk = NULL;
|
|
goto exit;
|
|
}
|
|
ret = clk_prepare_enable(c->clk);
|
|
if (ret) {
|
|
c->clk = NULL;
|
|
goto exit;
|
|
}
|
|
c->baseclk = clk_get_rate(c->clk);
|
|
master->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1);
|
|
master->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1);
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
c->membase = devm_ioremap_resource(&dev->dev, res);
|
|
if (IS_ERR(c->membase))
|
|
goto exit_busy;
|
|
|
|
/* enter config mode */
|
|
mcr = txx9spi_rd(c, TXx9_SPMCR);
|
|
mcr &= ~(TXx9_SPMCR_OPMODE | TXx9_SPMCR_SPSTP | TXx9_SPMCR_BCLR);
|
|
txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR);
|
|
|
|
irq = platform_get_irq(dev, 0);
|
|
if (irq < 0)
|
|
goto exit_busy;
|
|
ret = devm_request_irq(&dev->dev, irq, txx9spi_interrupt, 0,
|
|
"spi_txx9", c);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
c->last_chipselect = -1;
|
|
|
|
dev_info(&dev->dev, "at %#llx, irq %d, %dMHz\n",
|
|
(unsigned long long)res->start, irq,
|
|
(c->baseclk + 500000) / 1000000);
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA;
|
|
|
|
master->bus_num = dev->id;
|
|
master->setup = txx9spi_setup;
|
|
master->transfer = txx9spi_transfer;
|
|
master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
|
|
|
|
ret = devm_spi_register_master(&dev->dev, master);
|
|
if (ret)
|
|
goto exit;
|
|
return 0;
|
|
exit_busy:
|
|
ret = -EBUSY;
|
|
exit:
|
|
clk_disable_unprepare(c->clk);
|
|
spi_master_put(master);
|
|
return ret;
|
|
}
|
|
|
|
static int txx9spi_remove(struct platform_device *dev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(dev);
|
|
struct txx9spi *c = spi_master_get_devdata(master);
|
|
|
|
flush_work(&c->work);
|
|
clk_disable_unprepare(c->clk);
|
|
return 0;
|
|
}
|
|
|
|
/* work with hotplug and coldplug */
|
|
MODULE_ALIAS("platform:spi_txx9");
|
|
|
|
static struct platform_driver txx9spi_driver = {
|
|
.probe = txx9spi_probe,
|
|
.remove = txx9spi_remove,
|
|
.driver = {
|
|
.name = "spi_txx9",
|
|
},
|
|
};
|
|
|
|
static int __init txx9spi_init(void)
|
|
{
|
|
return platform_driver_register(&txx9spi_driver);
|
|
}
|
|
subsys_initcall(txx9spi_init);
|
|
|
|
static void __exit txx9spi_exit(void)
|
|
{
|
|
platform_driver_unregister(&txx9spi_driver);
|
|
}
|
|
module_exit(txx9spi_exit);
|
|
|
|
MODULE_DESCRIPTION("TXx9 SPI Driver");
|
|
MODULE_LICENSE("GPL");
|