1020 lines
26 KiB
C
1020 lines
26 KiB
C
/*
|
|
* Copyright (C) 2010 Juergen Beisert, Pengutronix
|
|
*
|
|
* This code is based on:
|
|
* Author: Vitaly Wool <vital@embeddedalley.com>
|
|
*
|
|
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
* Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#define DRIVER_NAME "mxsfb"
|
|
|
|
/**
|
|
* @file
|
|
* @brief LCDIF driver for i.MX23 and i.MX28
|
|
*
|
|
* The LCDIF support four modes of operation
|
|
* - MPU interface (to drive smart displays) -> not supported yet
|
|
* - VSYNC interface (like MPU interface plus Vsync) -> not supported yet
|
|
* - Dotclock interface (to drive LC displays with RGB data and sync signals)
|
|
* - DVI (to drive ITU-R BT656) -> not supported yet
|
|
*
|
|
* This driver depends on a correct setup of the pins used for this purpose
|
|
* (platform specific).
|
|
*
|
|
* For the developer: Don't forget to set the data bus width to the display
|
|
* in the imx_fb_videomode structure. You will else end up with ugly colours.
|
|
* If you fight against jitter you can vary the clock delay. This is a feature
|
|
* of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
|
|
* the required value in the imx_fb_videomode structure.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <video/of_display_timing.h>
|
|
#include <video/of_videomode.h>
|
|
#include <video/videomode.h>
|
|
|
|
#define REG_SET 4
|
|
#define REG_CLR 8
|
|
|
|
#define LCDC_CTRL 0x00
|
|
#define LCDC_CTRL1 0x10
|
|
#define LCDC_V4_CTRL2 0x20
|
|
#define LCDC_V3_TRANSFER_COUNT 0x20
|
|
#define LCDC_V4_TRANSFER_COUNT 0x30
|
|
#define LCDC_V4_CUR_BUF 0x40
|
|
#define LCDC_V4_NEXT_BUF 0x50
|
|
#define LCDC_V3_CUR_BUF 0x30
|
|
#define LCDC_V3_NEXT_BUF 0x40
|
|
#define LCDC_TIMING 0x60
|
|
#define LCDC_VDCTRL0 0x70
|
|
#define LCDC_VDCTRL1 0x80
|
|
#define LCDC_VDCTRL2 0x90
|
|
#define LCDC_VDCTRL3 0xa0
|
|
#define LCDC_VDCTRL4 0xb0
|
|
#define LCDC_DVICTRL0 0xc0
|
|
#define LCDC_DVICTRL1 0xd0
|
|
#define LCDC_DVICTRL2 0xe0
|
|
#define LCDC_DVICTRL3 0xf0
|
|
#define LCDC_DVICTRL4 0x100
|
|
#define LCDC_V4_DATA 0x180
|
|
#define LCDC_V3_DATA 0x1b0
|
|
#define LCDC_V4_DEBUG0 0x1d0
|
|
#define LCDC_V3_DEBUG0 0x1f0
|
|
|
|
#define CTRL_SFTRST (1 << 31)
|
|
#define CTRL_CLKGATE (1 << 30)
|
|
#define CTRL_BYPASS_COUNT (1 << 19)
|
|
#define CTRL_VSYNC_MODE (1 << 18)
|
|
#define CTRL_DOTCLK_MODE (1 << 17)
|
|
#define CTRL_DATA_SELECT (1 << 16)
|
|
#define CTRL_SET_BUS_WIDTH(x) (((x) & 0x3) << 10)
|
|
#define CTRL_GET_BUS_WIDTH(x) (((x) >> 10) & 0x3)
|
|
#define CTRL_SET_WORD_LENGTH(x) (((x) & 0x3) << 8)
|
|
#define CTRL_GET_WORD_LENGTH(x) (((x) >> 8) & 0x3)
|
|
#define CTRL_MASTER (1 << 5)
|
|
#define CTRL_DF16 (1 << 3)
|
|
#define CTRL_DF18 (1 << 2)
|
|
#define CTRL_DF24 (1 << 1)
|
|
#define CTRL_RUN (1 << 0)
|
|
|
|
#define CTRL1_FIFO_CLEAR (1 << 21)
|
|
#define CTRL1_SET_BYTE_PACKAGING(x) (((x) & 0xf) << 16)
|
|
#define CTRL1_GET_BYTE_PACKAGING(x) (((x) >> 16) & 0xf)
|
|
|
|
#define TRANSFER_COUNT_SET_VCOUNT(x) (((x) & 0xffff) << 16)
|
|
#define TRANSFER_COUNT_GET_VCOUNT(x) (((x) >> 16) & 0xffff)
|
|
#define TRANSFER_COUNT_SET_HCOUNT(x) ((x) & 0xffff)
|
|
#define TRANSFER_COUNT_GET_HCOUNT(x) ((x) & 0xffff)
|
|
|
|
|
|
#define VDCTRL0_ENABLE_PRESENT (1 << 28)
|
|
#define VDCTRL0_VSYNC_ACT_HIGH (1 << 27)
|
|
#define VDCTRL0_HSYNC_ACT_HIGH (1 << 26)
|
|
#define VDCTRL0_DOTCLK_ACT_FALLING (1 << 25)
|
|
#define VDCTRL0_ENABLE_ACT_HIGH (1 << 24)
|
|
#define VDCTRL0_VSYNC_PERIOD_UNIT (1 << 21)
|
|
#define VDCTRL0_VSYNC_PULSE_WIDTH_UNIT (1 << 20)
|
|
#define VDCTRL0_HALF_LINE (1 << 19)
|
|
#define VDCTRL0_HALF_LINE_MODE (1 << 18)
|
|
#define VDCTRL0_SET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
|
|
#define VDCTRL0_GET_VSYNC_PULSE_WIDTH(x) ((x) & 0x3ffff)
|
|
|
|
#define VDCTRL2_SET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
|
|
#define VDCTRL2_GET_HSYNC_PERIOD(x) ((x) & 0x3ffff)
|
|
|
|
#define VDCTRL3_MUX_SYNC_SIGNALS (1 << 29)
|
|
#define VDCTRL3_VSYNC_ONLY (1 << 28)
|
|
#define SET_HOR_WAIT_CNT(x) (((x) & 0xfff) << 16)
|
|
#define GET_HOR_WAIT_CNT(x) (((x) >> 16) & 0xfff)
|
|
#define SET_VERT_WAIT_CNT(x) ((x) & 0xffff)
|
|
#define GET_VERT_WAIT_CNT(x) ((x) & 0xffff)
|
|
|
|
#define VDCTRL4_SET_DOTCLK_DLY(x) (((x) & 0x7) << 29) /* v4 only */
|
|
#define VDCTRL4_GET_DOTCLK_DLY(x) (((x) >> 29) & 0x7) /* v4 only */
|
|
#define VDCTRL4_SYNC_SIGNALS_ON (1 << 18)
|
|
#define SET_DOTCLK_H_VALID_DATA_CNT(x) ((x) & 0x3ffff)
|
|
|
|
#define DEBUG0_HSYNC (1 < 26)
|
|
#define DEBUG0_VSYNC (1 < 25)
|
|
|
|
#define MIN_XRES 120
|
|
#define MIN_YRES 120
|
|
|
|
#define RED 0
|
|
#define GREEN 1
|
|
#define BLUE 2
|
|
#define TRANSP 3
|
|
|
|
#define STMLCDIF_8BIT 1 /** pixel data bus to the display is of 8 bit width */
|
|
#define STMLCDIF_16BIT 0 /** pixel data bus to the display is of 16 bit width */
|
|
#define STMLCDIF_18BIT 2 /** pixel data bus to the display is of 18 bit width */
|
|
#define STMLCDIF_24BIT 3 /** pixel data bus to the display is of 24 bit width */
|
|
|
|
#define MXSFB_SYNC_DATA_ENABLE_HIGH_ACT (1 << 6)
|
|
#define MXSFB_SYNC_DOTCLK_FALLING_ACT (1 << 7) /* negtive edge sampling */
|
|
|
|
enum mxsfb_devtype {
|
|
MXSFB_V3,
|
|
MXSFB_V4,
|
|
};
|
|
|
|
/* CPU dependent register offsets */
|
|
struct mxsfb_devdata {
|
|
unsigned transfer_count;
|
|
unsigned cur_buf;
|
|
unsigned next_buf;
|
|
unsigned debug0;
|
|
unsigned hs_wdth_mask;
|
|
unsigned hs_wdth_shift;
|
|
unsigned ipversion;
|
|
};
|
|
|
|
struct mxsfb_info {
|
|
struct fb_info fb_info;
|
|
struct platform_device *pdev;
|
|
struct clk *clk;
|
|
struct clk *clk_axi;
|
|
struct clk *clk_disp_axi;
|
|
void __iomem *base; /* registers */
|
|
unsigned allocated_size;
|
|
int enabled;
|
|
unsigned ld_intf_width;
|
|
unsigned dotclk_delay;
|
|
const struct mxsfb_devdata *devdata;
|
|
u32 sync;
|
|
struct regulator *reg_lcd;
|
|
};
|
|
|
|
#define mxsfb_is_v3(host) (host->devdata->ipversion == 3)
|
|
#define mxsfb_is_v4(host) (host->devdata->ipversion == 4)
|
|
|
|
static const struct mxsfb_devdata mxsfb_devdata[] = {
|
|
[MXSFB_V3] = {
|
|
.transfer_count = LCDC_V3_TRANSFER_COUNT,
|
|
.cur_buf = LCDC_V3_CUR_BUF,
|
|
.next_buf = LCDC_V3_NEXT_BUF,
|
|
.debug0 = LCDC_V3_DEBUG0,
|
|
.hs_wdth_mask = 0xff,
|
|
.hs_wdth_shift = 24,
|
|
.ipversion = 3,
|
|
},
|
|
[MXSFB_V4] = {
|
|
.transfer_count = LCDC_V4_TRANSFER_COUNT,
|
|
.cur_buf = LCDC_V4_CUR_BUF,
|
|
.next_buf = LCDC_V4_NEXT_BUF,
|
|
.debug0 = LCDC_V4_DEBUG0,
|
|
.hs_wdth_mask = 0x3fff,
|
|
.hs_wdth_shift = 18,
|
|
.ipversion = 4,
|
|
},
|
|
};
|
|
|
|
#define to_imxfb_host(x) (container_of(x, struct mxsfb_info, fb_info))
|
|
|
|
/* mask and shift depends on architecture */
|
|
static inline u32 set_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
|
|
{
|
|
return (val & host->devdata->hs_wdth_mask) <<
|
|
host->devdata->hs_wdth_shift;
|
|
}
|
|
|
|
static inline u32 get_hsync_pulse_width(struct mxsfb_info *host, unsigned val)
|
|
{
|
|
return (val >> host->devdata->hs_wdth_shift) &
|
|
host->devdata->hs_wdth_mask;
|
|
}
|
|
|
|
static const struct fb_bitfield def_rgb565[] = {
|
|
[RED] = {
|
|
.offset = 11,
|
|
.length = 5,
|
|
},
|
|
[GREEN] = {
|
|
.offset = 5,
|
|
.length = 6,
|
|
},
|
|
[BLUE] = {
|
|
.offset = 0,
|
|
.length = 5,
|
|
},
|
|
[TRANSP] = { /* no support for transparency */
|
|
.length = 0,
|
|
}
|
|
};
|
|
|
|
static const struct fb_bitfield def_rgb888[] = {
|
|
[RED] = {
|
|
.offset = 16,
|
|
.length = 8,
|
|
},
|
|
[GREEN] = {
|
|
.offset = 8,
|
|
.length = 8,
|
|
},
|
|
[BLUE] = {
|
|
.offset = 0,
|
|
.length = 8,
|
|
},
|
|
[TRANSP] = { /* no support for transparency */
|
|
.length = 0,
|
|
}
|
|
};
|
|
|
|
static inline unsigned chan_to_field(unsigned chan, struct fb_bitfield *bf)
|
|
{
|
|
chan &= 0xffff;
|
|
chan >>= 16 - bf->length;
|
|
return chan << bf->offset;
|
|
}
|
|
|
|
static int mxsfb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *fb_info)
|
|
{
|
|
struct mxsfb_info *host = to_imxfb_host(fb_info);
|
|
const struct fb_bitfield *rgb = NULL;
|
|
|
|
if (var->xres < MIN_XRES)
|
|
var->xres = MIN_XRES;
|
|
if (var->yres < MIN_YRES)
|
|
var->yres = MIN_YRES;
|
|
|
|
var->xres_virtual = var->xres;
|
|
|
|
var->yres_virtual = var->yres;
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 16:
|
|
/* always expect RGB 565 */
|
|
rgb = def_rgb565;
|
|
break;
|
|
case 32:
|
|
switch (host->ld_intf_width) {
|
|
case STMLCDIF_8BIT:
|
|
pr_debug("Unsupported LCD bus width mapping\n");
|
|
break;
|
|
case STMLCDIF_16BIT:
|
|
case STMLCDIF_18BIT:
|
|
case STMLCDIF_24BIT:
|
|
/* real 24 bit */
|
|
rgb = def_rgb888;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
pr_err("Unsupported colour depth: %u\n", var->bits_per_pixel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Copy the RGB parameters for this display
|
|
* from the machine specific parameters.
|
|
*/
|
|
var->red = rgb[RED];
|
|
var->green = rgb[GREEN];
|
|
var->blue = rgb[BLUE];
|
|
var->transp = rgb[TRANSP];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void mxsfb_enable_axi_clk(struct mxsfb_info *host)
|
|
{
|
|
if (host->clk_axi)
|
|
clk_prepare_enable(host->clk_axi);
|
|
}
|
|
|
|
static inline void mxsfb_disable_axi_clk(struct mxsfb_info *host)
|
|
{
|
|
if (host->clk_axi)
|
|
clk_disable_unprepare(host->clk_axi);
|
|
}
|
|
|
|
static void mxsfb_enable_controller(struct fb_info *fb_info)
|
|
{
|
|
struct mxsfb_info *host = to_imxfb_host(fb_info);
|
|
u32 reg;
|
|
int ret;
|
|
|
|
dev_dbg(&host->pdev->dev, "%s\n", __func__);
|
|
|
|
if (host->reg_lcd) {
|
|
ret = regulator_enable(host->reg_lcd);
|
|
if (ret) {
|
|
dev_err(&host->pdev->dev,
|
|
"lcd regulator enable failed: %d\n", ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (host->clk_disp_axi)
|
|
clk_prepare_enable(host->clk_disp_axi);
|
|
clk_prepare_enable(host->clk);
|
|
clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
|
|
|
|
mxsfb_enable_axi_clk(host);
|
|
|
|
/* if it was disabled, re-enable the mode again */
|
|
writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_SET);
|
|
|
|
/* enable the SYNC signals first, then the DMA engine */
|
|
reg = readl(host->base + LCDC_VDCTRL4);
|
|
reg |= VDCTRL4_SYNC_SIGNALS_ON;
|
|
writel(reg, host->base + LCDC_VDCTRL4);
|
|
|
|
writel(CTRL_RUN, host->base + LCDC_CTRL + REG_SET);
|
|
|
|
host->enabled = 1;
|
|
}
|
|
|
|
static void mxsfb_disable_controller(struct fb_info *fb_info)
|
|
{
|
|
struct mxsfb_info *host = to_imxfb_host(fb_info);
|
|
unsigned loop;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
dev_dbg(&host->pdev->dev, "%s\n", __func__);
|
|
|
|
/*
|
|
* Even if we disable the controller here, it will still continue
|
|
* until its FIFOs are running out of data
|
|
*/
|
|
writel(CTRL_DOTCLK_MODE, host->base + LCDC_CTRL + REG_CLR);
|
|
|
|
loop = 1000;
|
|
while (loop) {
|
|
reg = readl(host->base + LCDC_CTRL);
|
|
if (!(reg & CTRL_RUN))
|
|
break;
|
|
loop--;
|
|
}
|
|
|
|
reg = readl(host->base + LCDC_VDCTRL4);
|
|
writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
|
|
|
|
mxsfb_disable_axi_clk(host);
|
|
|
|
clk_disable_unprepare(host->clk);
|
|
if (host->clk_disp_axi)
|
|
clk_disable_unprepare(host->clk_disp_axi);
|
|
|
|
host->enabled = 0;
|
|
|
|
if (host->reg_lcd) {
|
|
ret = regulator_disable(host->reg_lcd);
|
|
if (ret)
|
|
dev_err(&host->pdev->dev,
|
|
"lcd regulator disable failed: %d\n", ret);
|
|
}
|
|
}
|
|
|
|
static int mxsfb_set_par(struct fb_info *fb_info)
|
|
{
|
|
struct mxsfb_info *host = to_imxfb_host(fb_info);
|
|
u32 ctrl, vdctrl0, vdctrl4;
|
|
int line_size, fb_size;
|
|
int reenable = 0;
|
|
|
|
line_size = fb_info->var.xres * (fb_info->var.bits_per_pixel >> 3);
|
|
fb_size = fb_info->var.yres_virtual * line_size;
|
|
|
|
if (fb_size > fb_info->fix.smem_len)
|
|
return -ENOMEM;
|
|
|
|
fb_info->fix.line_length = line_size;
|
|
|
|
/*
|
|
* It seems, you can't re-program the controller if it is still running.
|
|
* This may lead into shifted pictures (FIFO issue?).
|
|
* So, first stop the controller and drain its FIFOs
|
|
*/
|
|
if (host->enabled) {
|
|
reenable = 1;
|
|
mxsfb_disable_controller(fb_info);
|
|
}
|
|
|
|
mxsfb_enable_axi_clk(host);
|
|
|
|
/* clear the FIFOs */
|
|
writel(CTRL1_FIFO_CLEAR, host->base + LCDC_CTRL1 + REG_SET);
|
|
|
|
ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER |
|
|
CTRL_SET_BUS_WIDTH(host->ld_intf_width);
|
|
|
|
switch (fb_info->var.bits_per_pixel) {
|
|
case 16:
|
|
dev_dbg(&host->pdev->dev, "Setting up RGB565 mode\n");
|
|
ctrl |= CTRL_SET_WORD_LENGTH(0);
|
|
writel(CTRL1_SET_BYTE_PACKAGING(0xf), host->base + LCDC_CTRL1);
|
|
break;
|
|
case 32:
|
|
dev_dbg(&host->pdev->dev, "Setting up RGB888/666 mode\n");
|
|
ctrl |= CTRL_SET_WORD_LENGTH(3);
|
|
switch (host->ld_intf_width) {
|
|
case STMLCDIF_8BIT:
|
|
mxsfb_disable_axi_clk(host);
|
|
dev_err(&host->pdev->dev,
|
|
"Unsupported LCD bus width mapping\n");
|
|
return -EINVAL;
|
|
case STMLCDIF_16BIT:
|
|
case STMLCDIF_18BIT:
|
|
case STMLCDIF_24BIT:
|
|
/* real 24 bit */
|
|
break;
|
|
}
|
|
/* do not use packed pixels = one pixel per word instead */
|
|
writel(CTRL1_SET_BYTE_PACKAGING(0x7), host->base + LCDC_CTRL1);
|
|
break;
|
|
default:
|
|
mxsfb_disable_axi_clk(host);
|
|
dev_err(&host->pdev->dev, "Unhandled color depth of %u\n",
|
|
fb_info->var.bits_per_pixel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(ctrl, host->base + LCDC_CTRL);
|
|
|
|
writel(TRANSFER_COUNT_SET_VCOUNT(fb_info->var.yres) |
|
|
TRANSFER_COUNT_SET_HCOUNT(fb_info->var.xres),
|
|
host->base + host->devdata->transfer_count);
|
|
|
|
vdctrl0 = VDCTRL0_ENABLE_PRESENT | /* always in DOTCLOCK mode */
|
|
VDCTRL0_VSYNC_PERIOD_UNIT |
|
|
VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
|
|
VDCTRL0_SET_VSYNC_PULSE_WIDTH(fb_info->var.vsync_len);
|
|
if (fb_info->var.sync & FB_SYNC_HOR_HIGH_ACT)
|
|
vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
|
|
if (fb_info->var.sync & FB_SYNC_VERT_HIGH_ACT)
|
|
vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
|
|
if (host->sync & MXSFB_SYNC_DATA_ENABLE_HIGH_ACT)
|
|
vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
|
|
if (host->sync & MXSFB_SYNC_DOTCLK_FALLING_ACT)
|
|
vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
|
|
|
|
writel(vdctrl0, host->base + LCDC_VDCTRL0);
|
|
|
|
/* frame length in lines */
|
|
writel(fb_info->var.upper_margin + fb_info->var.vsync_len +
|
|
fb_info->var.lower_margin + fb_info->var.yres,
|
|
host->base + LCDC_VDCTRL1);
|
|
|
|
/* line length in units of clocks or pixels */
|
|
writel(set_hsync_pulse_width(host, fb_info->var.hsync_len) |
|
|
VDCTRL2_SET_HSYNC_PERIOD(fb_info->var.left_margin +
|
|
fb_info->var.hsync_len + fb_info->var.right_margin +
|
|
fb_info->var.xres),
|
|
host->base + LCDC_VDCTRL2);
|
|
|
|
writel(SET_HOR_WAIT_CNT(fb_info->var.left_margin +
|
|
fb_info->var.hsync_len) |
|
|
SET_VERT_WAIT_CNT(fb_info->var.upper_margin +
|
|
fb_info->var.vsync_len),
|
|
host->base + LCDC_VDCTRL3);
|
|
|
|
vdctrl4 = SET_DOTCLK_H_VALID_DATA_CNT(fb_info->var.xres);
|
|
if (mxsfb_is_v4(host))
|
|
vdctrl4 |= VDCTRL4_SET_DOTCLK_DLY(host->dotclk_delay);
|
|
writel(vdctrl4, host->base + LCDC_VDCTRL4);
|
|
|
|
writel(fb_info->fix.smem_start +
|
|
fb_info->fix.line_length * fb_info->var.yoffset,
|
|
host->base + host->devdata->next_buf);
|
|
|
|
mxsfb_disable_axi_clk(host);
|
|
|
|
if (reenable)
|
|
mxsfb_enable_controller(fb_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxsfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
|
u_int transp, struct fb_info *fb_info)
|
|
{
|
|
unsigned int val;
|
|
int ret = -EINVAL;
|
|
|
|
/*
|
|
* If greyscale is true, then we convert the RGB value
|
|
* to greyscale no matter what visual we are using.
|
|
*/
|
|
if (fb_info->var.grayscale)
|
|
red = green = blue = (19595 * red + 38470 * green +
|
|
7471 * blue) >> 16;
|
|
|
|
switch (fb_info->fix.visual) {
|
|
case FB_VISUAL_TRUECOLOR:
|
|
/*
|
|
* 12 or 16-bit True Colour. We encode the RGB value
|
|
* according to the RGB bitfield information.
|
|
*/
|
|
if (regno < 16) {
|
|
u32 *pal = fb_info->pseudo_palette;
|
|
|
|
val = chan_to_field(red, &fb_info->var.red);
|
|
val |= chan_to_field(green, &fb_info->var.green);
|
|
val |= chan_to_field(blue, &fb_info->var.blue);
|
|
|
|
pal[regno] = val;
|
|
ret = 0;
|
|
}
|
|
break;
|
|
|
|
case FB_VISUAL_STATIC_PSEUDOCOLOR:
|
|
case FB_VISUAL_PSEUDOCOLOR:
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxsfb_blank(int blank, struct fb_info *fb_info)
|
|
{
|
|
struct mxsfb_info *host = to_imxfb_host(fb_info);
|
|
|
|
switch (blank) {
|
|
case FB_BLANK_POWERDOWN:
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
case FB_BLANK_NORMAL:
|
|
if (host->enabled)
|
|
mxsfb_disable_controller(fb_info);
|
|
break;
|
|
|
|
case FB_BLANK_UNBLANK:
|
|
if (!host->enabled)
|
|
mxsfb_enable_controller(fb_info);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mxsfb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *fb_info)
|
|
{
|
|
struct mxsfb_info *host = to_imxfb_host(fb_info);
|
|
unsigned offset;
|
|
|
|
if (var->xoffset != 0)
|
|
return -EINVAL;
|
|
|
|
offset = fb_info->fix.line_length * var->yoffset;
|
|
|
|
mxsfb_enable_axi_clk(host);
|
|
|
|
/* update on next VSYNC */
|
|
writel(fb_info->fix.smem_start + offset,
|
|
host->base + host->devdata->next_buf);
|
|
|
|
mxsfb_disable_axi_clk(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct fb_ops mxsfb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_check_var = mxsfb_check_var,
|
|
.fb_set_par = mxsfb_set_par,
|
|
.fb_setcolreg = mxsfb_setcolreg,
|
|
.fb_blank = mxsfb_blank,
|
|
.fb_pan_display = mxsfb_pan_display,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
static int mxsfb_restore_mode(struct mxsfb_info *host,
|
|
struct fb_videomode *vmode)
|
|
{
|
|
struct fb_info *fb_info = &host->fb_info;
|
|
unsigned line_count;
|
|
unsigned period;
|
|
unsigned long pa, fbsize;
|
|
int bits_per_pixel, ofs, ret = 0;
|
|
u32 transfer_count, vdctrl0, vdctrl2, vdctrl3, vdctrl4, ctrl;
|
|
|
|
mxsfb_enable_axi_clk(host);
|
|
|
|
/* Only restore the mode when the controller is running */
|
|
ctrl = readl(host->base + LCDC_CTRL);
|
|
if (!(ctrl & CTRL_RUN)) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
vdctrl0 = readl(host->base + LCDC_VDCTRL0);
|
|
vdctrl2 = readl(host->base + LCDC_VDCTRL2);
|
|
vdctrl3 = readl(host->base + LCDC_VDCTRL3);
|
|
vdctrl4 = readl(host->base + LCDC_VDCTRL4);
|
|
|
|
transfer_count = readl(host->base + host->devdata->transfer_count);
|
|
|
|
vmode->xres = TRANSFER_COUNT_GET_HCOUNT(transfer_count);
|
|
vmode->yres = TRANSFER_COUNT_GET_VCOUNT(transfer_count);
|
|
|
|
switch (CTRL_GET_WORD_LENGTH(ctrl)) {
|
|
case 0:
|
|
bits_per_pixel = 16;
|
|
break;
|
|
case 3:
|
|
bits_per_pixel = 32;
|
|
break;
|
|
case 1:
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
fb_info->var.bits_per_pixel = bits_per_pixel;
|
|
|
|
vmode->pixclock = KHZ2PICOS(clk_get_rate(host->clk) / 1000U);
|
|
vmode->hsync_len = get_hsync_pulse_width(host, vdctrl2);
|
|
vmode->left_margin = GET_HOR_WAIT_CNT(vdctrl3) - vmode->hsync_len;
|
|
vmode->right_margin = VDCTRL2_GET_HSYNC_PERIOD(vdctrl2) -
|
|
vmode->hsync_len - vmode->left_margin - vmode->xres;
|
|
vmode->vsync_len = VDCTRL0_GET_VSYNC_PULSE_WIDTH(vdctrl0);
|
|
period = readl(host->base + LCDC_VDCTRL1);
|
|
vmode->upper_margin = GET_VERT_WAIT_CNT(vdctrl3) - vmode->vsync_len;
|
|
vmode->lower_margin = period - vmode->vsync_len -
|
|
vmode->upper_margin - vmode->yres;
|
|
|
|
vmode->vmode = FB_VMODE_NONINTERLACED;
|
|
|
|
vmode->sync = 0;
|
|
if (vdctrl0 & VDCTRL0_HSYNC_ACT_HIGH)
|
|
vmode->sync |= FB_SYNC_HOR_HIGH_ACT;
|
|
if (vdctrl0 & VDCTRL0_VSYNC_ACT_HIGH)
|
|
vmode->sync |= FB_SYNC_VERT_HIGH_ACT;
|
|
|
|
pr_debug("Reconstructed video mode:\n");
|
|
pr_debug("%dx%d, hsync: %u left: %u, right: %u, vsync: %u, upper: %u, lower: %u\n",
|
|
vmode->xres, vmode->yres, vmode->hsync_len, vmode->left_margin,
|
|
vmode->right_margin, vmode->vsync_len, vmode->upper_margin,
|
|
vmode->lower_margin);
|
|
pr_debug("pixclk: %ldkHz\n", PICOS2KHZ(vmode->pixclock));
|
|
|
|
host->ld_intf_width = CTRL_GET_BUS_WIDTH(ctrl);
|
|
host->dotclk_delay = VDCTRL4_GET_DOTCLK_DLY(vdctrl4);
|
|
|
|
fb_info->fix.line_length = vmode->xres * (bits_per_pixel >> 3);
|
|
|
|
pa = readl(host->base + host->devdata->cur_buf);
|
|
fbsize = fb_info->fix.line_length * vmode->yres;
|
|
if (pa < fb_info->fix.smem_start) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
if (pa + fbsize > fb_info->fix.smem_start + fb_info->fix.smem_len) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
ofs = pa - fb_info->fix.smem_start;
|
|
if (ofs) {
|
|
memmove(fb_info->screen_base, fb_info->screen_base + ofs, fbsize);
|
|
writel(fb_info->fix.smem_start, host->base + host->devdata->next_buf);
|
|
}
|
|
|
|
line_count = fb_info->fix.smem_len / fb_info->fix.line_length;
|
|
fb_info->fix.ypanstep = 1;
|
|
|
|
clk_prepare_enable(host->clk);
|
|
host->enabled = 1;
|
|
|
|
err:
|
|
if (ret)
|
|
mxsfb_disable_axi_clk(host);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxsfb_init_fbinfo_dt(struct mxsfb_info *host,
|
|
struct fb_videomode *vmode)
|
|
{
|
|
struct fb_info *fb_info = &host->fb_info;
|
|
struct fb_var_screeninfo *var = &fb_info->var;
|
|
struct device *dev = &host->pdev->dev;
|
|
struct device_node *np = host->pdev->dev.of_node;
|
|
struct device_node *display_np;
|
|
struct videomode vm;
|
|
u32 width;
|
|
int ret;
|
|
|
|
display_np = of_parse_phandle(np, "display", 0);
|
|
if (!display_np) {
|
|
dev_err(dev, "failed to find display phandle\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
ret = of_property_read_u32(display_np, "bus-width", &width);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to get property bus-width\n");
|
|
goto put_display_node;
|
|
}
|
|
|
|
switch (width) {
|
|
case 8:
|
|
host->ld_intf_width = STMLCDIF_8BIT;
|
|
break;
|
|
case 16:
|
|
host->ld_intf_width = STMLCDIF_16BIT;
|
|
break;
|
|
case 18:
|
|
host->ld_intf_width = STMLCDIF_18BIT;
|
|
break;
|
|
case 24:
|
|
host->ld_intf_width = STMLCDIF_24BIT;
|
|
break;
|
|
default:
|
|
dev_err(dev, "invalid bus-width value\n");
|
|
ret = -EINVAL;
|
|
goto put_display_node;
|
|
}
|
|
|
|
ret = of_property_read_u32(display_np, "bits-per-pixel",
|
|
&var->bits_per_pixel);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to get property bits-per-pixel\n");
|
|
goto put_display_node;
|
|
}
|
|
|
|
ret = of_get_videomode(display_np, &vm, OF_USE_NATIVE_MODE);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get videomode from DT\n");
|
|
goto put_display_node;
|
|
}
|
|
|
|
ret = fb_videomode_from_videomode(&vm, vmode);
|
|
if (ret < 0)
|
|
goto put_display_node;
|
|
|
|
if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
|
|
host->sync |= MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
|
|
if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
|
|
host->sync |= MXSFB_SYNC_DOTCLK_FALLING_ACT;
|
|
|
|
put_display_node:
|
|
of_node_put(display_np);
|
|
return ret;
|
|
}
|
|
|
|
static int mxsfb_init_fbinfo(struct mxsfb_info *host,
|
|
struct fb_videomode *vmode)
|
|
{
|
|
int ret;
|
|
struct device *dev = &host->pdev->dev;
|
|
struct fb_info *fb_info = &host->fb_info;
|
|
struct fb_var_screeninfo *var = &fb_info->var;
|
|
dma_addr_t fb_phys;
|
|
void *fb_virt;
|
|
unsigned fb_size;
|
|
|
|
fb_info->fbops = &mxsfb_ops;
|
|
fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST;
|
|
strlcpy(fb_info->fix.id, "mxs", sizeof(fb_info->fix.id));
|
|
fb_info->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
fb_info->fix.ypanstep = 1;
|
|
fb_info->fix.visual = FB_VISUAL_TRUECOLOR,
|
|
fb_info->fix.accel = FB_ACCEL_NONE;
|
|
|
|
ret = mxsfb_init_fbinfo_dt(host, vmode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
var->nonstd = 0;
|
|
var->activate = FB_ACTIVATE_NOW;
|
|
var->accel_flags = 0;
|
|
var->vmode = FB_VMODE_NONINTERLACED;
|
|
|
|
/* Memory allocation for framebuffer */
|
|
fb_size = SZ_2M;
|
|
fb_virt = dma_alloc_wc(dev, PAGE_ALIGN(fb_size), &fb_phys, GFP_KERNEL);
|
|
if (!fb_virt)
|
|
return -ENOMEM;
|
|
|
|
fb_info->fix.smem_start = fb_phys;
|
|
fb_info->screen_base = fb_virt;
|
|
fb_info->screen_size = fb_info->fix.smem_len = fb_size;
|
|
|
|
if (mxsfb_restore_mode(host, vmode))
|
|
memset(fb_virt, 0, fb_size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxsfb_free_videomem(struct mxsfb_info *host)
|
|
{
|
|
struct device *dev = &host->pdev->dev;
|
|
struct fb_info *fb_info = &host->fb_info;
|
|
|
|
dma_free_wc(dev, fb_info->screen_size, fb_info->screen_base,
|
|
fb_info->fix.smem_start);
|
|
}
|
|
|
|
static const struct platform_device_id mxsfb_devtype[] = {
|
|
{
|
|
.name = "imx23-fb",
|
|
.driver_data = MXSFB_V3,
|
|
}, {
|
|
.name = "imx28-fb",
|
|
.driver_data = MXSFB_V4,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
|
|
|
|
static const struct of_device_id mxsfb_dt_ids[] = {
|
|
{ .compatible = "fsl,imx23-lcdif", .data = &mxsfb_devtype[0], },
|
|
{ .compatible = "fsl,imx28-lcdif", .data = &mxsfb_devtype[1], },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mxsfb_dt_ids);
|
|
|
|
static int mxsfb_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(mxsfb_dt_ids, &pdev->dev);
|
|
struct resource *res;
|
|
struct mxsfb_info *host;
|
|
struct fb_info *fb_info;
|
|
struct fb_videomode *mode;
|
|
int ret;
|
|
|
|
if (of_id)
|
|
pdev->id_entry = of_id->data;
|
|
|
|
fb_info = framebuffer_alloc(sizeof(struct mxsfb_info), &pdev->dev);
|
|
if (!fb_info) {
|
|
dev_err(&pdev->dev, "Failed to allocate fbdev\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mode = devm_kzalloc(&pdev->dev, sizeof(struct fb_videomode),
|
|
GFP_KERNEL);
|
|
if (mode == NULL)
|
|
return -ENOMEM;
|
|
|
|
host = to_imxfb_host(fb_info);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
host->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(host->base)) {
|
|
ret = PTR_ERR(host->base);
|
|
goto fb_release;
|
|
}
|
|
|
|
host->pdev = pdev;
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
host->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
|
|
|
|
host->clk = devm_clk_get(&host->pdev->dev, NULL);
|
|
if (IS_ERR(host->clk)) {
|
|
ret = PTR_ERR(host->clk);
|
|
goto fb_release;
|
|
}
|
|
|
|
host->clk_axi = devm_clk_get(&host->pdev->dev, "axi");
|
|
if (IS_ERR(host->clk_axi))
|
|
host->clk_axi = NULL;
|
|
|
|
host->clk_disp_axi = devm_clk_get(&host->pdev->dev, "disp_axi");
|
|
if (IS_ERR(host->clk_disp_axi))
|
|
host->clk_disp_axi = NULL;
|
|
|
|
host->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
|
|
if (IS_ERR(host->reg_lcd))
|
|
host->reg_lcd = NULL;
|
|
|
|
fb_info->pseudo_palette = devm_kzalloc(&pdev->dev, sizeof(u32) * 16,
|
|
GFP_KERNEL);
|
|
if (!fb_info->pseudo_palette) {
|
|
ret = -ENOMEM;
|
|
goto fb_release;
|
|
}
|
|
|
|
ret = mxsfb_init_fbinfo(host, mode);
|
|
if (ret != 0)
|
|
goto fb_release;
|
|
|
|
fb_videomode_to_var(&fb_info->var, mode);
|
|
|
|
/* init the color fields */
|
|
mxsfb_check_var(&fb_info->var, fb_info);
|
|
|
|
platform_set_drvdata(pdev, fb_info);
|
|
|
|
ret = register_framebuffer(fb_info);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev,"Failed to register framebuffer\n");
|
|
goto fb_destroy;
|
|
}
|
|
|
|
if (!host->enabled) {
|
|
mxsfb_enable_axi_clk(host);
|
|
writel(0, host->base + LCDC_CTRL);
|
|
mxsfb_disable_axi_clk(host);
|
|
mxsfb_set_par(fb_info);
|
|
mxsfb_enable_controller(fb_info);
|
|
}
|
|
|
|
dev_info(&pdev->dev, "initialized\n");
|
|
|
|
return 0;
|
|
|
|
fb_destroy:
|
|
if (host->enabled)
|
|
clk_disable_unprepare(host->clk);
|
|
fb_release:
|
|
framebuffer_release(fb_info);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxsfb_remove(struct platform_device *pdev)
|
|
{
|
|
struct fb_info *fb_info = platform_get_drvdata(pdev);
|
|
struct mxsfb_info *host = to_imxfb_host(fb_info);
|
|
|
|
if (host->enabled)
|
|
mxsfb_disable_controller(fb_info);
|
|
|
|
unregister_framebuffer(fb_info);
|
|
mxsfb_free_videomem(host);
|
|
|
|
framebuffer_release(fb_info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxsfb_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct fb_info *fb_info = platform_get_drvdata(pdev);
|
|
struct mxsfb_info *host = to_imxfb_host(fb_info);
|
|
|
|
mxsfb_enable_axi_clk(host);
|
|
|
|
/*
|
|
* Force stop the LCD controller as keeping it running during reboot
|
|
* might interfere with the BootROM's boot mode pads sampling.
|
|
*/
|
|
writel(CTRL_RUN, host->base + LCDC_CTRL + REG_CLR);
|
|
|
|
mxsfb_disable_axi_clk(host);
|
|
}
|
|
|
|
static struct platform_driver mxsfb_driver = {
|
|
.probe = mxsfb_probe,
|
|
.remove = mxsfb_remove,
|
|
.shutdown = mxsfb_shutdown,
|
|
.id_table = mxsfb_devtype,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = mxsfb_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mxsfb_driver);
|
|
|
|
MODULE_DESCRIPTION("Freescale mxs framebuffer driver");
|
|
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
|
|
MODULE_LICENSE("GPL");
|