104 lines
4 KiB
Text
104 lines
4 KiB
Text
C6X Interrupt Chips
|
|
-------------------
|
|
|
|
* C64X+ Core Interrupt Controller
|
|
|
|
The core interrupt controller provides 16 prioritized interrupts to the
|
|
C64X+ core. Priority 0 and 1 are used for reset and NMI respectively.
|
|
Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt
|
|
sources coming from outside the core.
|
|
|
|
Required properties:
|
|
--------------------
|
|
- compatible: Should be "ti,c64x+core-pic";
|
|
- #interrupt-cells: <1>
|
|
|
|
Interrupt Specifier Definition
|
|
------------------------------
|
|
Single cell specifying the core interrupt priority level (4-15) where
|
|
4 is highest priority and 15 is lowest priority.
|
|
|
|
Example
|
|
-------
|
|
core_pic: interrupt-controller@0 {
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
compatible = "ti,c64x+core-pic";
|
|
};
|
|
|
|
|
|
|
|
* C64x+ Megamodule Interrupt Controller
|
|
|
|
The megamodule PIC consists of four interrupt mupliplexers each of which
|
|
combine up to 32 interrupt inputs into a single interrupt output which
|
|
may be cascaded into the core interrupt controller. The megamodule PIC
|
|
has a total of 12 outputs cascading into the core interrupt controller.
|
|
One for each core interrupt priority level. In addition to the combined
|
|
interrupt sources, individual megamodule interrupts may be cascaded to
|
|
the core interrupt controller. When an individual interrupt is cascaded,
|
|
it is no longer handled through a megamodule interrupt combiner and is
|
|
considered to have the core interrupt controller as the parent.
|
|
|
|
Required properties:
|
|
--------------------
|
|
- compatible: "ti,c64x+megamod-pic"
|
|
- interrupt-controller
|
|
- #interrupt-cells: <1>
|
|
- reg: base address and size of register area
|
|
- interrupt-parent: must be core interrupt controller
|
|
- interrupts: This should have four cells; one for each interrupt combiner.
|
|
The cells contain the core priority interrupt to which the
|
|
corresponding combiner output is wired.
|
|
|
|
Optional properties:
|
|
--------------------
|
|
- ti,c64x+megamod-pic-mux: Array of 12 cells correspnding to the 12 core
|
|
priority interrupts. The first cell corresponds to
|
|
core priority 4 and the last cell corresponds to
|
|
core priority 15. The value of each cell is the
|
|
megamodule interrupt source which is MUXed to
|
|
the core interrupt corresponding to the cell
|
|
position. Allowed values are 4 - 127. Mapping for
|
|
interrupts 0 - 3 (combined interrupt sources) are
|
|
ignored.
|
|
|
|
Interrupt Specifier Definition
|
|
------------------------------
|
|
Single cell specifying the megamodule interrupt source (4-127). Note that
|
|
interrupts mapped directly to the core with "ti,c64x+megamod-pic-mux" will
|
|
use the core interrupt controller as their parent and the specifier will
|
|
be the core priority level, not the megamodule interrupt number.
|
|
|
|
Examples
|
|
--------
|
|
megamod_pic: interrupt-controller@1800000 {
|
|
compatible = "ti,c64x+megamod-pic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x1800000 0x1000>;
|
|
interrupt-parent = <&core_pic>;
|
|
interrupts = < 12 13 14 15 >;
|
|
};
|
|
|
|
This is a minimal example where all individual interrupts go through a
|
|
combiner. Combiner-0 is mapped to core interrupt 12, combiner-1 is mapped
|
|
to interrupt 13, etc.
|
|
|
|
|
|
megamod_pic: interrupt-controller@1800000 {
|
|
compatible = "ti,c64x+megamod-pic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x1800000 0x1000>;
|
|
interrupt-parent = <&core_pic>;
|
|
interrupts = < 12 13 14 15 >;
|
|
ti,c64x+megamod-pic-mux = < 0 0 0 0
|
|
32 0 0 0
|
|
0 0 0 0 >;
|
|
};
|
|
|
|
This the same as the first example except that megamodule interrupt 32 is
|
|
mapped directly to core priority interrupt 8. The node using this interrupt
|
|
must set the core controller as its interrupt parent and use 8 in the
|
|
interrupt specifier value.
|