519 lines
15 KiB
C
519 lines
15 KiB
C
/*
|
|
* Driver for Linear Technology LTC2945 I2C Power Monitor
|
|
*
|
|
* Copyright (c) 2014 Guenter Roeck
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* chip registers */
|
|
#define LTC2945_CONTROL 0x00
|
|
#define LTC2945_ALERT 0x01
|
|
#define LTC2945_STATUS 0x02
|
|
#define LTC2945_FAULT 0x03
|
|
#define LTC2945_POWER_H 0x05
|
|
#define LTC2945_MAX_POWER_H 0x08
|
|
#define LTC2945_MIN_POWER_H 0x0b
|
|
#define LTC2945_MAX_POWER_THRES_H 0x0e
|
|
#define LTC2945_MIN_POWER_THRES_H 0x11
|
|
#define LTC2945_SENSE_H 0x14
|
|
#define LTC2945_MAX_SENSE_H 0x16
|
|
#define LTC2945_MIN_SENSE_H 0x18
|
|
#define LTC2945_MAX_SENSE_THRES_H 0x1a
|
|
#define LTC2945_MIN_SENSE_THRES_H 0x1c
|
|
#define LTC2945_VIN_H 0x1e
|
|
#define LTC2945_MAX_VIN_H 0x20
|
|
#define LTC2945_MIN_VIN_H 0x22
|
|
#define LTC2945_MAX_VIN_THRES_H 0x24
|
|
#define LTC2945_MIN_VIN_THRES_H 0x26
|
|
#define LTC2945_ADIN_H 0x28
|
|
#define LTC2945_MAX_ADIN_H 0x2a
|
|
#define LTC2945_MIN_ADIN_H 0x2c
|
|
#define LTC2945_MAX_ADIN_THRES_H 0x2e
|
|
#define LTC2945_MIN_ADIN_THRES_H 0x30
|
|
#define LTC2945_MIN_ADIN_THRES_L 0x31
|
|
|
|
/* Fault register bits */
|
|
|
|
#define FAULT_ADIN_UV (1 << 0)
|
|
#define FAULT_ADIN_OV (1 << 1)
|
|
#define FAULT_VIN_UV (1 << 2)
|
|
#define FAULT_VIN_OV (1 << 3)
|
|
#define FAULT_SENSE_UV (1 << 4)
|
|
#define FAULT_SENSE_OV (1 << 5)
|
|
#define FAULT_POWER_UV (1 << 6)
|
|
#define FAULT_POWER_OV (1 << 7)
|
|
|
|
/* Control register bits */
|
|
|
|
#define CONTROL_MULT_SELECT (1 << 0)
|
|
#define CONTROL_TEST_MODE (1 << 4)
|
|
|
|
static inline bool is_power_reg(u8 reg)
|
|
{
|
|
return reg < LTC2945_SENSE_H;
|
|
}
|
|
|
|
/* Return the value from the given register in uW, mV, or mA */
|
|
static long long ltc2945_reg_to_val(struct device *dev, u8 reg)
|
|
{
|
|
struct regmap *regmap = dev_get_drvdata(dev);
|
|
unsigned int control;
|
|
u8 buf[3];
|
|
long long val;
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(regmap, reg, buf,
|
|
is_power_reg(reg) ? 3 : 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (is_power_reg(reg)) {
|
|
/* power */
|
|
val = (buf[0] << 16) + (buf[1] << 8) + buf[2];
|
|
} else {
|
|
/* current, voltage */
|
|
val = (buf[0] << 4) + (buf[1] >> 4);
|
|
}
|
|
|
|
switch (reg) {
|
|
case LTC2945_POWER_H:
|
|
case LTC2945_MAX_POWER_H:
|
|
case LTC2945_MIN_POWER_H:
|
|
case LTC2945_MAX_POWER_THRES_H:
|
|
case LTC2945_MIN_POWER_THRES_H:
|
|
/*
|
|
* Convert to uW by assuming current is measured with
|
|
* an 1mOhm sense resistor, similar to current
|
|
* measurements.
|
|
* Control register bit 0 selects if voltage at SENSE+/VDD
|
|
* or voltage at ADIN is used to measure power.
|
|
*/
|
|
ret = regmap_read(regmap, LTC2945_CONTROL, &control);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (control & CONTROL_MULT_SELECT) {
|
|
/* 25 mV * 25 uV = 0.625 uV resolution. */
|
|
val *= 625LL;
|
|
} else {
|
|
/* 0.5 mV * 25 uV = 0.0125 uV resolution. */
|
|
val = (val * 25LL) >> 1;
|
|
}
|
|
break;
|
|
case LTC2945_VIN_H:
|
|
case LTC2945_MAX_VIN_H:
|
|
case LTC2945_MIN_VIN_H:
|
|
case LTC2945_MAX_VIN_THRES_H:
|
|
case LTC2945_MIN_VIN_THRES_H:
|
|
/* 25 mV resolution. Convert to mV. */
|
|
val *= 25;
|
|
break;
|
|
case LTC2945_ADIN_H:
|
|
case LTC2945_MAX_ADIN_H:
|
|
case LTC2945_MIN_ADIN_THRES_H:
|
|
case LTC2945_MAX_ADIN_THRES_H:
|
|
case LTC2945_MIN_ADIN_H:
|
|
/* 0.5mV resolution. Convert to mV. */
|
|
val = val >> 1;
|
|
break;
|
|
case LTC2945_SENSE_H:
|
|
case LTC2945_MAX_SENSE_H:
|
|
case LTC2945_MIN_SENSE_H:
|
|
case LTC2945_MAX_SENSE_THRES_H:
|
|
case LTC2945_MIN_SENSE_THRES_H:
|
|
/*
|
|
* 25 uV resolution. Convert to current as measured with
|
|
* an 1 mOhm sense resistor, in mA. If a different sense
|
|
* resistor is installed, calculate the actual current by
|
|
* dividing the reported current by the sense resistor value
|
|
* in mOhm.
|
|
*/
|
|
val *= 25;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static int ltc2945_val_to_reg(struct device *dev, u8 reg,
|
|
unsigned long val)
|
|
{
|
|
struct regmap *regmap = dev_get_drvdata(dev);
|
|
unsigned int control;
|
|
int ret;
|
|
|
|
switch (reg) {
|
|
case LTC2945_POWER_H:
|
|
case LTC2945_MAX_POWER_H:
|
|
case LTC2945_MIN_POWER_H:
|
|
case LTC2945_MAX_POWER_THRES_H:
|
|
case LTC2945_MIN_POWER_THRES_H:
|
|
/*
|
|
* Convert to register value by assuming current is measured
|
|
* with an 1mOhm sense resistor, similar to current
|
|
* measurements.
|
|
* Control register bit 0 selects if voltage at SENSE+/VDD
|
|
* or voltage at ADIN is used to measure power, which in turn
|
|
* determines register calculations.
|
|
*/
|
|
ret = regmap_read(regmap, LTC2945_CONTROL, &control);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (control & CONTROL_MULT_SELECT) {
|
|
/* 25 mV * 25 uV = 0.625 uV resolution. */
|
|
val = DIV_ROUND_CLOSEST(val, 625);
|
|
} else {
|
|
/*
|
|
* 0.5 mV * 25 uV = 0.0125 uV resolution.
|
|
* Divide first to avoid overflow;
|
|
* accept loss of accuracy.
|
|
*/
|
|
val = DIV_ROUND_CLOSEST(val, 25) * 2;
|
|
}
|
|
break;
|
|
case LTC2945_VIN_H:
|
|
case LTC2945_MAX_VIN_H:
|
|
case LTC2945_MIN_VIN_H:
|
|
case LTC2945_MAX_VIN_THRES_H:
|
|
case LTC2945_MIN_VIN_THRES_H:
|
|
/* 25 mV resolution. */
|
|
val /= 25;
|
|
break;
|
|
case LTC2945_ADIN_H:
|
|
case LTC2945_MAX_ADIN_H:
|
|
case LTC2945_MIN_ADIN_THRES_H:
|
|
case LTC2945_MAX_ADIN_THRES_H:
|
|
case LTC2945_MIN_ADIN_H:
|
|
/* 0.5mV resolution. */
|
|
val *= 2;
|
|
break;
|
|
case LTC2945_SENSE_H:
|
|
case LTC2945_MAX_SENSE_H:
|
|
case LTC2945_MIN_SENSE_H:
|
|
case LTC2945_MAX_SENSE_THRES_H:
|
|
case LTC2945_MIN_SENSE_THRES_H:
|
|
/*
|
|
* 25 uV resolution. Convert to current as measured with
|
|
* an 1 mOhm sense resistor, in mA. If a different sense
|
|
* resistor is installed, calculate the actual current by
|
|
* dividing the reported current by the sense resistor value
|
|
* in mOhm.
|
|
*/
|
|
val = DIV_ROUND_CLOSEST(val, 25);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static ssize_t ltc2945_show_value(struct device *dev,
|
|
struct device_attribute *da, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
long long value;
|
|
|
|
value = ltc2945_reg_to_val(dev, attr->index);
|
|
if (value < 0)
|
|
return value;
|
|
return snprintf(buf, PAGE_SIZE, "%lld\n", value);
|
|
}
|
|
|
|
static ssize_t ltc2945_set_value(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct regmap *regmap = dev_get_drvdata(dev);
|
|
u8 reg = attr->index;
|
|
unsigned long val;
|
|
u8 regbuf[3];
|
|
int num_regs;
|
|
int regval;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* convert to register value, then clamp and write result */
|
|
regval = ltc2945_val_to_reg(dev, reg, val);
|
|
if (is_power_reg(reg)) {
|
|
regval = clamp_val(regval, 0, 0xffffff);
|
|
regbuf[0] = regval >> 16;
|
|
regbuf[1] = (regval >> 8) & 0xff;
|
|
regbuf[2] = regval;
|
|
num_regs = 3;
|
|
} else {
|
|
regval = clamp_val(regval, 0, 0xfff) << 4;
|
|
regbuf[0] = regval >> 8;
|
|
regbuf[1] = regval & 0xff;
|
|
num_regs = 2;
|
|
}
|
|
ret = regmap_bulk_write(regmap, reg, regbuf, num_regs);
|
|
return ret < 0 ? ret : count;
|
|
}
|
|
|
|
static ssize_t ltc2945_reset_history(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct regmap *regmap = dev_get_drvdata(dev);
|
|
u8 reg = attr->index;
|
|
int num_regs = is_power_reg(reg) ? 3 : 2;
|
|
u8 buf_min[3] = { 0xff, 0xff, 0xff };
|
|
u8 buf_max[3] = { 0, 0, 0 };
|
|
unsigned long val;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 10, &val);
|
|
if (ret)
|
|
return ret;
|
|
if (val != 1)
|
|
return -EINVAL;
|
|
|
|
ret = regmap_update_bits(regmap, LTC2945_CONTROL, CONTROL_TEST_MODE,
|
|
CONTROL_TEST_MODE);
|
|
|
|
/* Reset minimum */
|
|
ret = regmap_bulk_write(regmap, reg, buf_min, num_regs);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (reg) {
|
|
case LTC2945_MIN_POWER_H:
|
|
reg = LTC2945_MAX_POWER_H;
|
|
break;
|
|
case LTC2945_MIN_SENSE_H:
|
|
reg = LTC2945_MAX_SENSE_H;
|
|
break;
|
|
case LTC2945_MIN_VIN_H:
|
|
reg = LTC2945_MAX_VIN_H;
|
|
break;
|
|
case LTC2945_MIN_ADIN_H:
|
|
reg = LTC2945_MAX_ADIN_H;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "Bad register: 0x%x\n", reg);
|
|
return -EINVAL;
|
|
}
|
|
/* Reset maximum */
|
|
ret = regmap_bulk_write(regmap, reg, buf_max, num_regs);
|
|
|
|
/* Try resetting test mode even if there was an error */
|
|
regmap_update_bits(regmap, LTC2945_CONTROL, CONTROL_TEST_MODE, 0);
|
|
|
|
return ret ? : count;
|
|
}
|
|
|
|
static ssize_t ltc2945_show_bool(struct device *dev,
|
|
struct device_attribute *da, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct regmap *regmap = dev_get_drvdata(dev);
|
|
unsigned int fault;
|
|
int ret;
|
|
|
|
ret = regmap_read(regmap, LTC2945_FAULT, &fault);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
fault &= attr->index;
|
|
if (fault) /* Clear reported faults in chip register */
|
|
regmap_update_bits(regmap, LTC2945_FAULT, attr->index, 0);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", !!fault);
|
|
}
|
|
|
|
/* Input voltages */
|
|
|
|
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_VIN_H);
|
|
static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR, ltc2945_show_value,
|
|
ltc2945_set_value, LTC2945_MIN_VIN_THRES_H);
|
|
static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR, ltc2945_show_value,
|
|
ltc2945_set_value, LTC2945_MAX_VIN_THRES_H);
|
|
static SENSOR_DEVICE_ATTR(in1_lowest, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_MIN_VIN_H);
|
|
static SENSOR_DEVICE_ATTR(in1_highest, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_MAX_VIN_H);
|
|
static SENSOR_DEVICE_ATTR(in1_reset_history, S_IWUSR, NULL,
|
|
ltc2945_reset_history, LTC2945_MIN_VIN_H);
|
|
|
|
static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_ADIN_H);
|
|
static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO | S_IWUSR, ltc2945_show_value,
|
|
ltc2945_set_value, LTC2945_MIN_ADIN_THRES_H);
|
|
static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO | S_IWUSR, ltc2945_show_value,
|
|
ltc2945_set_value, LTC2945_MAX_ADIN_THRES_H);
|
|
static SENSOR_DEVICE_ATTR(in2_lowest, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_MIN_ADIN_H);
|
|
static SENSOR_DEVICE_ATTR(in2_highest, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_MAX_ADIN_H);
|
|
static SENSOR_DEVICE_ATTR(in2_reset_history, S_IWUSR, NULL,
|
|
ltc2945_reset_history, LTC2945_MIN_ADIN_H);
|
|
|
|
/* Voltage alarms */
|
|
|
|
static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ltc2945_show_bool, NULL,
|
|
FAULT_VIN_UV);
|
|
static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ltc2945_show_bool, NULL,
|
|
FAULT_VIN_OV);
|
|
static SENSOR_DEVICE_ATTR(in2_min_alarm, S_IRUGO, ltc2945_show_bool, NULL,
|
|
FAULT_ADIN_UV);
|
|
static SENSOR_DEVICE_ATTR(in2_max_alarm, S_IRUGO, ltc2945_show_bool, NULL,
|
|
FAULT_ADIN_OV);
|
|
|
|
/* Currents (via sense resistor) */
|
|
|
|
static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_SENSE_H);
|
|
static SENSOR_DEVICE_ATTR(curr1_min, S_IRUGO | S_IWUSR, ltc2945_show_value,
|
|
ltc2945_set_value, LTC2945_MIN_SENSE_THRES_H);
|
|
static SENSOR_DEVICE_ATTR(curr1_max, S_IRUGO | S_IWUSR, ltc2945_show_value,
|
|
ltc2945_set_value, LTC2945_MAX_SENSE_THRES_H);
|
|
static SENSOR_DEVICE_ATTR(curr1_lowest, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_MIN_SENSE_H);
|
|
static SENSOR_DEVICE_ATTR(curr1_highest, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_MAX_SENSE_H);
|
|
static SENSOR_DEVICE_ATTR(curr1_reset_history, S_IWUSR, NULL,
|
|
ltc2945_reset_history, LTC2945_MIN_SENSE_H);
|
|
|
|
/* Current alarms */
|
|
|
|
static SENSOR_DEVICE_ATTR(curr1_min_alarm, S_IRUGO, ltc2945_show_bool, NULL,
|
|
FAULT_SENSE_UV);
|
|
static SENSOR_DEVICE_ATTR(curr1_max_alarm, S_IRUGO, ltc2945_show_bool, NULL,
|
|
FAULT_SENSE_OV);
|
|
|
|
/* Power */
|
|
|
|
static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ltc2945_show_value, NULL,
|
|
LTC2945_POWER_H);
|
|
static SENSOR_DEVICE_ATTR(power1_min, S_IRUGO | S_IWUSR, ltc2945_show_value,
|
|
ltc2945_set_value, LTC2945_MIN_POWER_THRES_H);
|
|
static SENSOR_DEVICE_ATTR(power1_max, S_IRUGO | S_IWUSR, ltc2945_show_value,
|
|
ltc2945_set_value, LTC2945_MAX_POWER_THRES_H);
|
|
static SENSOR_DEVICE_ATTR(power1_input_lowest, S_IRUGO, ltc2945_show_value,
|
|
NULL, LTC2945_MIN_POWER_H);
|
|
static SENSOR_DEVICE_ATTR(power1_input_highest, S_IRUGO, ltc2945_show_value,
|
|
NULL, LTC2945_MAX_POWER_H);
|
|
static SENSOR_DEVICE_ATTR(power1_reset_history, S_IWUSR, NULL,
|
|
ltc2945_reset_history, LTC2945_MIN_POWER_H);
|
|
|
|
/* Power alarms */
|
|
|
|
static SENSOR_DEVICE_ATTR(power1_min_alarm, S_IRUGO, ltc2945_show_bool, NULL,
|
|
FAULT_POWER_UV);
|
|
static SENSOR_DEVICE_ATTR(power1_max_alarm, S_IRUGO, ltc2945_show_bool, NULL,
|
|
FAULT_POWER_OV);
|
|
|
|
static struct attribute *ltc2945_attrs[] = {
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_min.dev_attr.attr,
|
|
&sensor_dev_attr_in1_max.dev_attr.attr,
|
|
&sensor_dev_attr_in1_lowest.dev_attr.attr,
|
|
&sensor_dev_attr_in1_highest.dev_attr.attr,
|
|
&sensor_dev_attr_in1_reset_history.dev_attr.attr,
|
|
&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_min.dev_attr.attr,
|
|
&sensor_dev_attr_in2_max.dev_attr.attr,
|
|
&sensor_dev_attr_in2_lowest.dev_attr.attr,
|
|
&sensor_dev_attr_in2_highest.dev_attr.attr,
|
|
&sensor_dev_attr_in2_reset_history.dev_attr.attr,
|
|
&sensor_dev_attr_in2_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in2_max_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_curr1_input.dev_attr.attr,
|
|
&sensor_dev_attr_curr1_min.dev_attr.attr,
|
|
&sensor_dev_attr_curr1_max.dev_attr.attr,
|
|
&sensor_dev_attr_curr1_lowest.dev_attr.attr,
|
|
&sensor_dev_attr_curr1_highest.dev_attr.attr,
|
|
&sensor_dev_attr_curr1_reset_history.dev_attr.attr,
|
|
&sensor_dev_attr_curr1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_power1_input.dev_attr.attr,
|
|
&sensor_dev_attr_power1_min.dev_attr.attr,
|
|
&sensor_dev_attr_power1_max.dev_attr.attr,
|
|
&sensor_dev_attr_power1_input_lowest.dev_attr.attr,
|
|
&sensor_dev_attr_power1_input_highest.dev_attr.attr,
|
|
&sensor_dev_attr_power1_reset_history.dev_attr.attr,
|
|
&sensor_dev_attr_power1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_power1_max_alarm.dev_attr.attr,
|
|
|
|
NULL,
|
|
};
|
|
ATTRIBUTE_GROUPS(ltc2945);
|
|
|
|
static const struct regmap_config ltc2945_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = LTC2945_MIN_ADIN_THRES_L,
|
|
};
|
|
|
|
static int ltc2945_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct regmap *regmap;
|
|
|
|
regmap = devm_regmap_init_i2c(client, <c2945_regmap_config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(dev, "failed to allocate register map\n");
|
|
return PTR_ERR(regmap);
|
|
}
|
|
|
|
/* Clear faults */
|
|
regmap_write(regmap, LTC2945_FAULT, 0x00);
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
|
|
regmap,
|
|
ltc2945_groups);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id ltc2945_id[] = {
|
|
{"ltc2945", 0},
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, ltc2945_id);
|
|
|
|
static struct i2c_driver ltc2945_driver = {
|
|
.driver = {
|
|
.name = "ltc2945",
|
|
},
|
|
.probe = ltc2945_probe,
|
|
.id_table = ltc2945_id,
|
|
};
|
|
|
|
module_i2c_driver(ltc2945_driver);
|
|
|
|
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
|
|
MODULE_DESCRIPTION("LTC2945 driver");
|
|
MODULE_LICENSE("GPL");
|